Message Board
A forum for the
discussion of building genuine arcade controls for use with personal computers.
[ Post Message ] [ Help]
- Encouraging news about light gun support for MAME! - Mark Boyko 1/12/2000
(0)
- Apologies to Saint. I can never help myself when a BBQ is going on. I'll shutup on this particular subject now. (nt) - Genom 1/11/2000
(0)
- Has anyone read this? - 1/11/2000
(1)
- Yet another coin door light question... - D 1/11/2000
(1)
- Arrg.. my panel - Tom61 1/11/2000
(2)
- Does anyone know how to connect the newer coin mechs(the ones with the small circuit board) to a PC mame cabinet?.......... - Dr Doolittle 1/11/2000
(1)
- Back to your regularly scheduled program: Congrats on the great review, Ray & Co.! * NT - Joe 1/11/2000
(1)
- ArcadeOS 2.35 - Brian Lewis 1/11/2000
(0)
- Hey Saint, Get out your Hedge Clippers, Its time to Trim the Board :) - StaticX 1/11/2000
(1)
- Recommend a PSX controller to gut? - Tekkendork 1/10/2000
(2)
- My Arcade Cabinet is finished! Got some pictures and info up! - Mark Boyko 1/10/2000
(38)
- Building exact duplicates of arcade controls - Ghost 1/10/2000
(2)
- Can someone tell me how to connect the cabinet speaker to the soundblaster port using RCA connectors? thanks *nt* - Dr Doolittle 1/10/2000
(3)
- pre-pre-planning stage questions - Dennis 1/10/2000
(5)
- My panel, not sure if I should be sad or happy.... - Tom61 1/09/2000
(2)
- Completed my control panel, but need a Twisty Grip or similiar ? - Steve Gilham 1/09/2000
(3)
- Hook up JAMMA boards to my 53" Sony? - Dann 1/09/2000
(1)
- Monitors & TVs Sideways? - beethead 1/09/2000
(1)
- Does anyone know if it is possible to manually do this on a chassis or arcade monitor............ - Dr. Doolittle 1/08/2000
(6)
- Cassette rack joystick finished - pictures coming soon - Caveman Joe 1/08/2000
(1)
- Hey Saint, you're wrong! :) - Gerald Gorman 1/08/2000
(0)
- New Cabinet for Rockin' - Rockin 1/08/2000
(2)
- Control Panel questions - D 1/07/2000
(5)
- What is a SIGSEGV anyway?? *NT* - onion 1/07/2000
(1)
- Troubles with monitor - Werner 1/07/2000
(1)
- Arcade Monitor Specs - Mike Bissett 1/07/2000
(2)
- Splicing two mice?? - Brian 1/07/2000
(1)
- Badly wanted - Steven 1/07/2000
(3)
- ArcadeOS 2.34 - Brian Lewis 1/07/2000
(8)
- Built my spinner - link inside - Nightowl007 1/07/2000
(0)
- I've just finished wiring up my cabinet, with a keyboard hack - but the diodes don't stop key blocking, which is just as bad as ghosting. PLEASE HELP! (nt) - Jason Alexander 1/07/2000
(2)
- Arcade monitor - Scott 1/07/2000
(1)
- TV adjusting.... - Genom 1/06/2000
(0)
- I'm making a variable rapid fire circuit, anyone interested in one? - Tom61 1/06/2000
(2)
- Still For Sale & Multi-Jamma Harness Thingy - Nate Thompson 1/06/2000
(2)
- KE24 Question: Spinner on the RS-232 interface? - Nightowl007 1/06/2000
(0)
- Map the spinner to the mouse ? - Steve G 1/06/2000
(1)
- Need help with Wico joysticks - mckechnossomy 1/05/2000
(3)
- Technical videocard question. . . - -Ace- 1/05/2000
(2)
- Updated my page - Tom61 1/05/2000
(0)
- K72T and Happs Trackball + Spinner - Tony 1/05/2000
(1)
- Lighted buttons - Tony 1/05/2000
(0)
- Amazing Hagstrom - JadeKnight 1/05/2000
(0)
- Ke72-t / Button pics - JadeKnight 1/05/2000
(2)
- My Cabinet is finally online - Dave Clemens 1/05/2000
(0)
- Looking for 8-way trigger grips sticks - James 1/05/2000
(2)
- UltraSpinner - Update - - Xiaou2 1/05/2000
(1)
- arcadeOS 2.34 released - Mr SaLTy 1/04/2000
(3)
- Interact 3D Programpad - Romero Destini 1/04/2000
(1)
- New Opti-MAME - Andy Geez 1/04/2000
(0)
- Questions on wiring Perfect 360 Joystick - Marlin Liew 1/03/2000
(3)
- Pure3D - SirCash 1/03/2000
(0)
- New universal DOS front-end - Dave Dribin 1/03/2000
(2)
- arcade monitor resolution bug? - Dr doolittle 1/02/2000
(2)
- The new logo looks wicked cool! (nt) - TwistyGrip 1/02/2000
(1)
- Any information on arcade auctions dates?? - John Mac 1/02/2000
(1)
- Happy 19100? - RAssault 1/01/100
(3)
- how do you select "NONE" for controls in the Config Menu? - MikEy 1/01/100
(3)
- What happens if you use the trackball for a spinner? - MikEy 1/01/100
(1)
- Happy New Year! - Dave 1/01/100
(1)
- Troubles with mouse behavior in MAME - Mark Boyko 12/31/99
(3)
- Wingman Warrior Spinner - Steve G 12/31/99
(1)
- Happy new year! - Gerald Gorman 12/31/99
(2)
- 4 player cabinet about done see *pics*-thanks everyone! - onion 12/30/99
(2)
- Will this still give the ghosting key problem?? - Peter Knight 12/30/99
(3)
- Info about "dynamo" cabs (from the guy selling me one) - Tom61 12/30/99
(0)
- Looking for stores in Paris - Toavina Andriamanerasoa 12/30/99
(0)
- Looking for stores in Paris - Toavina Andriamanerasoa 12/30/99
(0)
- Where to get info on "DYNAMO" cabinets?????(nt) - NIVO 12/30/99
(1)
- Only disabled ROM's showing in ArcadeOS - Help :) - onion 12/29/99
(2)
- Cabinet in Atlanta, GA - Todd Dove 12/29/99
(1)
- Having a pretty good week! - Tom61 12/29/99
(1)
- Where can I get a cabinet in Northern VA, Maryland, or D.C. ? - Johan Yavari 12/29/99
(1)
- Is anybody else having trouble downloading the latest MAME beta? - Caveman Joe 12/29/99
(1)
- Hey Saint! Cool logo! - Tom61 12/29/99
(2)
- Another Hagstrom Story: All Good! - Rockin' 12/29/99
(0)
- Ultra Spinner "Sneak Preview" :) - Xiaou2 12/28/99
(5)
- Looking for Some Control Panels Pics from Various Games... - Nate Thompson 12/28/99
(1)
- Looking for Some Control Panels Pics from Various Games... - Nate Thompson 12/28/99
(0)
- Cabinet is Finished! New Pictures! - LuSiD 12/28/99
(23)
- I-PAC interface: what I've been doing in the hols! - Andy Warne 12/27/99
(0)
- Does video card choice really impact performance? - Dave Dribin 12/27/99
(0)
- Lineo DR-DOS 7.03 works OK for me - Dave Dribin 12/27/99
(1)
- Stuff for Trade (including super-8s still sealed & unused buttons) - Rob Caskey (StaticX) 12/27/99
(0)
- Awesome build-your-own steering wheel page! - -John 12/26/99
(3)
- Let me be the first to say Merry Christmas! - MisteR2 12/25/99
(3)
- What are you all using for quick connects? - Sasha 12/24/99
(6)
- Klov.org! - Tom61 12/24/99
(2)
- Gathering info - Tom61 12/24/99
(1)
- How to get power to a VGA monitor in an empty cabinet - Glenise 12/24/99
(0)
- Help me with my Gravis Xterminator! - Mark Boyko 12/24/99
(0)
- Hagstrom KE72T...Should I or shouldn't I? - MikEy 12/24/99
(9)
- Arkanoid spinner to PC ??? - Robert McElwee 12/23/99
(6)
- In cas I don't have a chance..... - Ray Iddings 12/22/99
(6)
- Homebuilt Keyboard Encoder - Leif Engman 12/22/99
(6)
- Awaiting your CustomArcade review!!!!!!!!!!!!!!! - _Spekkio_ 12/22/99
(1)
- Problem with SB AWE 64 and DOS mame in DOS mode - DiTTo 12/22/99
(1)
- So no one here knows whether you can re-assign the functions of the mouse buttons in MAME??? - Mark Boyko 12/21/99
(3)
- Just finished my Gravis gamepad pro hack control panel(in) - NIVO 12/21/99
(0)
- Win 95 installation help needed! - tom61 12/21/99
(2)
- Newbie with a million and one questions... - RAssault 12/21/99
(4)
- re-assign mouse buttons in mame?!?! - Mark Boyko 12/21/99
(1)
- One Button, Two Functions? - Chazz 12/21/99
(1)
- Here's some good Lexan (polycarbonate plexiglass) tips - Ryan Osborn 12/21/99
(0)
- Horizontal screen is cut off... - Dr Doolittle 12/21/99
(1)
- In case you missed it - =-JacK-= 12/20/99
(0)
- I've finally finished my joystick! - Caveman Joe 12/20/99
(2)
- What guage wires for joysticks/buttons? - Sasha 12/20/99
(4)
- 4-way joystick? - The Man 12/20/99
(1)
- Where can I get "Wood Grain Decals"? - LaserRot 12/19/99
(1)
- New "Shift" Key for Mame, anyone got any info? - Rockin' 12/19/99
(3)
- how do i wire six buttons for each player on a jamma finger board? - forko 12/19/99
(4)
- Questions about coin mechanisms...... - Sam Brady 12/19/99
(1)
- Big congratulations to all helpful people on this message board!! - Johnny 12/18/99
(2)
- Snipercade Atari 2600 Deca Prize Pic - Ray Iddings 12/18/99
(0)
- Ebay hardware auction...need to sell to buy ke72.. pass it along to anyone who might be interested - Jim K 12/18/99
(2)
- Arcade Machine 4-Sale - Greywolf 12/18/99
(0)
- OK-ready to solder on my gravis gamepadpro-need help(in)!!!! - NIVO 12/17/99
(3)
- has anyone done " Jude's Star Wars controller hack "?? I need HELP!! - Dave Clemens 12/17/99
(1)
- Sensitivity settings on a Happ Trackball - I need help ! - onion 12/17/99
(1)
- Website - Andy Warne 12/17/99
(0)
- Are there any posters on this board who have been unable to directly connect an arcade monitor to a PC (using a VGA cable, not PC2JAMMA)? and can you state why? Thanks *NT* - Dr Doolittle 12/17/99
(1)
- Newbie arcade monitor question - Robert McElwee 12/17/99
(1)
- Trackball serial interface, not longer made. - The Doc 12/17/99
(0)
- USB Trackball interface with Mame - The Doc 12/17/99
(0)
- ArcadeOS Questions? - Chazz 12/17/99
(2)
- USB Trackball interface with Mame - The Doc 12/17/99
(0)
- Cutting the grooves for t-molding - Brian 12/17/99
(6)
- Games moving WAY too fast?? - onion 12/16/99
(6)
- Trackball - MOUSE.COM driver?? - I need help please! - onion 12/16/99
(1)
- Windows Desktop On Vertical Monitor - Nate Thompson 12/16/99
(4)
- mame action keys - mviars 12/16/99
(1)
- Sound In MAME - Chazz 12/16/99
(3)
- Just thought of something.... - Tom61 12/16/99
(0)
- I'm looking for a simple program that would tell me what buttons are being pressed on the keyboard at any given time. I'm looking for such a program for when I use my bro's Stick-it controller. Thanks *nt* - _Spekkio_ 12/16/99
(3)
- Can anyone give me some advice on a Haunted Castle cabinet? - -Ace- 12/16/99
(1)
- analog wheel emulator - aux 12/16/99
(0)
- Does anyone know if a medium-res monitor (like the one in Virtua Fighter 2) can be hooked up to a PC for a MAME Cabinet? If so, how? Thanx. *nt* - Touch of Evil 12/15/99
(3)
- R-Cade Vision, only need to buy 500!! Read This - Rockin 12/15/99
(9)
- ripping graphics - gus 12/15/99
(2)
- Not much joy getting the R-Cade Vision Arcade Board.. - Andy Geez 12/15/99
(0)
- WG3100 #2 seems alittle fat! WG owners READ Please!! - Rockin' 12/14/99
(2)
- Wingman Warrior joystick Hack - Steve G 12/14/99
(0)
- Board trimming in progress... - saint 12/14/99
(1)
- Hi, does anyone have a good matrix table map, for use with KE24 - Justin 12/14/99
(5)
- Hey, Saint - suggestion for your Links section: - Caveman Joe 12/14/99
(2)
- Please help guys, I'm getting desperate. - Dr Doolittle 12/14/99
(6)
- Earth to Ray, anyone out there NT - Rockin' 12/13/99
(1)
- Great! I messed up Windows! I need to know some way to backup the Outlook Expresse's messages! - Tom61 12/13/99
(6)
- Two analog joysticks? - James 12/13/99
(3)
- Hagstrom is an *excellent* company... (more) - PacFan 12/13/99
(0)
- Hagstrom and Jamma help needed - Robert McElwee 12/13/99
(3)
- Joystick button emulate to keybroad - Edward Lau 12/13/99
(0)
- Arcade Cabinet - Joel 12/12/99
(2)
- Problem with Ke72T from Hagstrom - onion 12/12/99
(5)
- Anyone here around Atlanta? - Rob Caskey (StaticX) 12/12/99
(3)
- Mouse button 3? - The Man 12/12/99
(3)
- just finished cab and updated webpage - immorta 12/12/99
(0)
- Arcade Stick - TType85 12/12/99
(1)
- U3100 problem - D 12/11/99
(1)
- to frontend, or not to frontend - Jason Alex 12/11/99
(1)
- Got DOS? - Richard Ragon 12/11/99
(16)
- Someone finally made us a video card - Tim 12/11/99
(9)
- Am I wrong? - The Man 12/10/99
(1)
- wiring Arkanoid spinner - Scott 12/10/99
(3)
- Donkey Kong Monitor to PC VGA - Rockin' 12/09/99
(5)
- Connecting a 2600 stick to a PC - Sal Bugliarisi 12/09/99
(4)
- My Arcade Interface now ready - Andy Warne 12/09/99
(3)
- need DOS drivers for wingman warrior - Darrell Morrison 12/09/99
(3)
- diodes, key blocking & key masking - Sam Brady 12/09/99
(0)
- A button wiring question? - The Man 12/09/99
(3)
- Dos Networking - Macros 12/09/99
(4)
- Please help, KE-24 newbie and need help setting controls...... - Jack 12/09/99
(1)
- OptiMAME Video Driver Question - Rick 12/09/99
(1)
- Great, just great!! ARGH! - Tom61 12/08/99
(1)
- N64 controller hack - iguana storm 12/08/99
(0)
- Just wanted a little advice.... - D 12/08/99
(2)
- What games need a 45'd joystick? - The Man 12/08/99
(4)
- Anyone know If the latest Emu+ includes the Videodrivers that Opti-mame incorporates? - -Ace- 12/07/99
(7)
- EMU+ w/ Preliminary OptiMAME - Nate Thompson 12/07/99
(1)
- TV or MONITOR with voodoo 3000 tv out card - sirsteve 12/07/99
(5)
- Arcade monitor up and running - kinda :) Colors are BLAH! - onion 12/06/99
(3)
- Computer Cases? - Chazz 12/06/99
(3)
- Good deal on analog driving controls.... - Joe 12/06/99
(5)
- Which diodes must I use for keyboard hack? - Sam Brady 12/06/99
(5)
- Anyone know of a source for lighted "volcano" buttons? - Pengo 12/06/99
(1)
- Using usb keyboard AND ps2 keyboard hack ? - Eric Bole-Feysot 12/06/99
(0)
- pinout for arcade monitor - Docter Doolittle 12/06/99
(0)
- Anyone know where I could purchase a JAM!! ? - D 12/06/99
(3)
- Any regulars willing to help me out? - Acur8 12/05/99
(2)
- The Green Wire... - Nate Thompson 12/05/99
(3)
- I'm looking for virtual world tesla pod - moogy 12/05/99
(0)
- 6 degree joystick - moogy 12/05/99
(0)
- Just got the new microsoft intellieye mouse(more)..... - NIVO 12/05/99
(1)
- What should I do to my autoexec.bat file to make it boot up in DOS? - Caveman Joe 12/05/99
(0)
- Sidewinder Hacking Help! - Graboid 12/05/99
(0)
- Pool games (yeh!) - StriderX 12/05/99
(0)
- How many keys need to be pressed at the same time to generate a ghost key? - Sam Brady 12/05/99
(1)
- Hey Ray Iddings please respond to my email - Rodney 12/04/99
(3)
- T2 (or Similar Game) Replacement Guns - Nate Thompson 12/04/99
(3)
- PSX Arcade Controls Hack... - Tim1tyte 12/04/99
(6)
- 2 spinners question - The Man 12/04/99
(5)
- ZipStik is verrrrry nice ! - James 12/04/99
(6)
- best place to purchase arcade monitors? - iguana storm 12/04/99
(2)
- What's happened to the message board? - Caveman Joe 12/04/99
(2)
- PC & PS - Will this work? - Caveman Joe 12/04/99
(5)
- PS & PC at once - will this work? - Caveman Joe 12/04/99
(2)
- ATI Rage II+ speed problem - Jason Alex 12/04/99
(1)
- 8 Way Rotary Joysticks (LS 30) - The Man 12/04/99
(4)
- Creating ArcadeOS .nms Files - Joe 12/04/99
(0)
- Check this out..... Funny stuff - Tom61 12/03/99
(0)
- visit - no 12/03/99
(0)
- Stumbled across this about trackballs(read inside)...... - NIVO 12/03/99
(0)
- MAME Sideart Tips from RGVAC - Joe 12/03/99
(0)
- keyboard hacking... - iguana storm 12/03/99
(1)
- Rotatable PC monitor (NOT arcade monitor) - Lars 12/03/99
(7)
- OptiMame Andy? - The Man 12/03/99
(0)
- Nintendo (sanyo) video arcade monitor - arcadejunky 12/02/99
(2)
- I'm getting an A33 :( - JoseQ 12/02/99
(1)
- test - saint 12/02/99
(0)
- Arcade Cabinet Color Suggestions - Rockin 12/02/99
(0)
- Get well Andy ;). . . here's looking forward to your next Opti-Mame release(nt) - -Ace- 12/02/99
(0)
- Question . . . - saint 12/02/99
(1)
- Possible board down time - saint 12/02/99
(0)
- Is there a way to connect arcade-style controls to PS pads? - Caveman Joe 12/02/99
(5)
- I need technical data on the IBM keyboard standard - John Bosso 12/02/99
(2)
- no ghosting with keyboard hack - Sam Brady 12/02/99
(7)
- Does this seem right??? - Jason Alex 12/02/99
(10)
- Latest free cab offer from RGVAC (in San Francisco).... - Joe 12/02/99
(1)
- How many buttons for 4 player (joystick) games? - The Man 12/02/99
(1)
- Just curious.....anybody posting here from Ohio???? - NIVO 12/02/99
(11)
- Recompiling MAME without info screen - Chazz 12/02/99
(6)
- Gravis Flightstick repair suggestions????? - Cablouie 12/02/99
(0)
- A not so happy Hotrod customer - Robert McElwee 12/02/99
(3)
- RBG monitor pinouts...for JAMMA - Shaun Isaac 12/01/99
(0)
- Free JAMMA cabinet, SF Bay area, CA - Tim 12/01/99
(0)
- Control Panel button spacing question........ - NIVO 12/01/99
(4)
- Elf Bowling - Andy Desak 12/01/99
(3)
- Need DPMI file????? ArcadeOS won't load in DOS boot? - onion 12/01/99
(1)
- Arcade Monitor Needed. Any for Sale? - John Mac 12/01/99
(1)
- Did you read my other posts on the ArcadeOS Msg Board ShamanRa? - The Man 12/01/99
(1)
- A VERY happy HotRod customer - Sal Bugliarisi 12/01/99
(1)
- Track and Field (Trackball) - Jason 12/01/99
(0)
- Mouse control question - Ben 12/01/99
(1)
- Are there any advantages of a medium resolution monitor? - Jeremy Cline 12/01/99
(1)
- Newer arcade cabinets - Steve Morris 12/01/99
(3)
- OK guys, trackball and mouse question........... - NIVO 12/01/99
(2)
- I finally Got My cabinet up and running ((Picture)) - Gary Pranzo 12/01/99
(5)
- Air Hockey, anyone?? - John 12/01/99
(1)
- 1 inch border on monitor when using Arcade@Home - John Mac 11/30/99
(0)
- Great DOS MP3 player!! - Ryan Osborn 11/30/99
(1)
- heard anything about the ZipStik??? - IguanaStorm 11/30/99
(1)
- Saint, please read... - Gerald Gorman 11/30/99
(4)
- JUST ORDERED MY KE-72T!!! - Brian 11/30/99
(1)
- I've almost got Opti-Mame synced to beta 10 - Tom61 11/30/99
(1)
- N64 interface through usb - p-man 11/30/99
(3)
- PC2JAMMA Project working good. Cabinet finished. - Nick 11/30/99
(0)
- Direct Pad Pro problem? - steve_morris 11/30/99
(0)
- PSX Controller thru the USB?? - Ray Iddings 11/29/99
(1)
- Where can I get DOS? Can I use Win98 - onion 11/29/99
(6)
- Question on Crystal trackball from COMPUSA............ - NIVO 11/29/99
(6)
- How do I cut a trackball hole in a METAL control panel. - ShamanRa 11/28/99
(10)
- Arcade Paradise page javascript. - JP4 11/28/99
(0)
- Can't use trackball with Cabol???? - Ben 11/28/99
(1)
- Using mamevideo in a cabinet (pure DOS)... here's how: (sort of) - Gerald Gorman 11/28/99
(11)
- Hey Andy! - Tom61 11/27/99
(2)
- There have been some real innovative cabinets here lately! - JP4 11/27/99
(1)
- Building a PC - Questions - Moz5 11/27/99
(3)
- Arcade Paradise webpage is up!! - JP4 11/27/99
(0)
- best universal console-pc arcade stick? - IguanaStorm 11/27/99
(2)
- Anyone know the name of this game?? - Ben 11/27/99
(1)
- What would you like to see in a cabinet page? - Switch 11/27/99
(5)
- ROMS won't work in new version of MAME - Ben 11/26/99
(2)
- Encoder suggestions? - Robbie 11/26/99
(1)
- Saint - did you get the e-mail of the pictures? Do you need anything else? (Thanks) (nt) - PacFan 11/26/99
(2)
- Is anybody else having problems using the trackball option on the KE72? If not, tell me how? (Please) - PacFan 11/26/99
(9)
- Controller for Konami's Beatmania? - vjay 11/26/99
(0)
- OK. It's official. I'm a geek. - saint 11/25/99
(1)
- Please give me a hand! I need someone in the UK to sell me a joystick and some leaf-style buttons - Caveman Joe 11/25/99
(2)
- Thanks - john 11/25/99
(1)
- looking for dutch builders - Werner 11/25/99
(3)
- Need recipe for turkey jerky - Jerky 11/25/99
(0)
- WICO Atari 2600 Trackball to PC - Mr. Do 11/25/99
(0)
- New message board feature - saint 11/25/99
(3)
- Monitor output problem - Gary Pranzo 11/24/99
(3)
- A simple question needs a simple answer. . . - -Ace- 11/24/99
(2)
- I just want to take a second and wish everyone a Happy Thanksgiving! - PacFan 11/24/99
(2)
- Saint! - I may have the last two cabinet projects you are looking for! (if that's ok) - PacFan 11/24/99
(3)
- hotrod compatability.. - robin 11/24/99
(1)
- Help with arcade monitor to PC vid card - onion 11/23/99
(1)
- Hey Jim K... - Torgo 11/23/99
(1)
- ACT FAST!!!! Free cab w/monitor in NY - Joe 11/23/99
(0)
- Put up a site - Tom61 11/23/99
(0)
- mame crash - Odie 11/23/99
(3)
- MAME screenshot archive - Cablouie 11/22/99
(0)
- Mutilator - ray iddings 11/22/99
(2)
- New feature - victims... er ... testers wanted - saint 11/22/99
(0)
- Looks like people are going to need foot pedals for their cabinets. - Just Michael 11/22/99
(15)
- $12 ATI Mach 64 PCI video cards - Ryan Osborn 11/22/99
(0)
- Email? Can anyone email me at saint@null.net or is that broken? - saint 11/22/99
(2)
- SVGA-arcade monitor-or TV, which should I use (long:P) - immorta 11/22/99
(1)
- ANDY.. It was like plug and play but the 16 bit didn't work. - Nick 11/22/99
(0)
- Front Line w/ trackball? - JP4 11/22/99
(0)
- Diamond Viper 550 cards with TV out suck without a monitor hooked up - Jim K 11/21/99
(2)
- problem with hagstrom encoder... - Jon 11/21/99
(6)
- Saint my emails to you are bouncings (nt) - Ray Iddings 11/21/99
(2)
- Minimum CP hardware requirements?? - johnmac 11/21/99
(2)
- How do you control win 98 se boot sequence - Jim K 11/21/99
(4)
- Andy, I have a question concerning ATI videocards. . . - -Ace- 11/20/99
(1)
- Adjusting arcade monitor geometry??? - justme 11/20/99
(1)
- Excellent suggestion for a joystick case for those in UK - CAVEMAN JOE 11/20/99
(1)
- New opti-MAME for people to try that don't own an ATI mach64 and use an Arcade Monitor, -Ace- also get this file!! - Andy 11/20/99
(1)
- Smashtv on an arcade monitor - Macros 11/20/99
(3)
- Defender layout - Ray Iddings 11/20/99
(3)
- Good prices on Computers and Hardware - Jim M 11/20/99
(2)
- New MAME site up! - PlanetMAME 11/20/99
(0)
- 100 projects? - Driph(Chris Ainsworth) 11/20/99
(0)
- My last resort!! Joystick not working in MAME with Pure DOS! - Nick 11/19/99
(1)
- HELP!!. .Andy or anyone else. . on the topic of an ATI card. . - -Ace- 11/19/99
(9)
- Mouse/trackball sensitive settings..... - Joe 11/19/99
(3)
- About the Board - Rob Caskey(StaticX) 11/19/99
(4)
- SPARE PARTS VENDORS IN UK - CAVEMAN JOE 11/19/99
(2)
- Need tips on joystick hack(in)..... - NIVO 11/19/99
(1)
- Sidewinder Hack - Tom7777 11/19/99
(5)
- MAME box control interfaces - Chris Ainsworth 11/19/99
(2)
- PLEASE E-MAIL ME WITH JOYSTICK HELP! - John 11/18/99
(1)
- PacMAME: Ask and you shall receive.... - Joe 11/18/99
(0)
- Need some advice on 2 possible ATI videocards. . . - -Ace- 11/18/99
(11)
- Hey Saint - Andy Desak 11/18/99
(2)
- T2 Gun - Nate Thompson 11/18/99
(3)
- Argh.. I've been charged about 1 week ago.. I still don't receive my 2 four bucks trackballs... Life is sad, indeed.. (NT) :´(( - Gerald Gorman 11/18/99
(1)
- Please read , to be our testbed.. - Stick-It Joysticks 11/17/99
(1)
- Can Someone Scan this image? I'm looking everywhere.. - Dave 11/17/99
(0)
- 4 player cabinate delieverd today! - onion 11/17/99
(1)
- Direct Pad Pro, PSX controller and Assault... - ElvisP 11/17/99
(1)
- I am buying a KE-72 as we speak, had them overnight it, should have it by Friday =)... - PacFan 11/17/99
(0)
- Items for Sale - Nate Thompson 11/17/99
(1)
- Does any one know where I can find a psx dual shock to usb interface? - Orochi 11/17/99
(4)
- Does anyone know where I can get a key mapper for usb game pads? - Orochi 11/17/99
(0)
- Happs Super8 Joysticks Help!!! - John 11/16/99
(2)
- Mame with 2 sidewinders? possible? - LaserRot 11/16/99
(8)
- Two Trackball Interface Inquiry - S Jones 11/16/99
(4)
- Digital joysticks with Crossbow?? anyone? - Jim Putman 11/16/99
(1)
- Act-Labs has the Power Ramps back in stock again. - Just Michael 11/16/99
(0)
- JoyMouse - Jerky 11/15/99
(0)
- Hagstrom Encoder - tonight :) - saint 11/15/99
(5)
- The ultimate encoder, would you buy it? - Tom61 11/15/99
(4)
- New Opti-MAME, dual marble fun anyone?? - A.Geez 11/15/99
(4)
- What if... (controller interface ideas, put on your creativity hats) - Cablouie 11/15/99
(1)
- MegaRacer controller for PSX - AUX 11/15/99
(0)
- VGA output, voltages, and arcade monitors (Brian Lewis, Andy Geezer, et al) - Joe 11/15/99
(2)
- Arcade Control interface - Andy Warne 11/15/99
(4)
- Bandwidth crunching - saint 11/14/99
(6)
- New mame license, does it affect anybody but Tim (Arcade@Home)? - Tom61 11/14/99
(9)
- Videocard in PC2Jamma. Which one to choose ?! - Pier 11/14/99
(1)
- Controller builders -- GO USB! No keyboard interface! - Jeff Atwood 11/14/99
(20)
- * * * * Monitor Nightmare - HELP! * * * * - Joe 11/14/99
(4)
- test - Another test 11/13/99
(3)
- Slight update on my project. - Tom61 11/13/99
(0)
- You no longer have to wait for page to load before you can hit the post button ... I think :) - test #2 11/13/99
(3)
- Oops - lost a few messages - saint 11/13/99
(1)
- Can anyone comment on the VGA - 27" W.G U3000 monitor? - Joseph Fox 11/12/99
(5)
- Looking for any lightgun information.. - Andy Geez 11/12/99
(11)
- Tom61.. u using powerramp mite? if so.... hows it going? - NIVO 11/12/99
(2)
- Just got my rotary joysticks! - Macros 11/12/99
(1)
- GAMMA is your friend... - Joe 11/12/99
(2)
- Let the hacking begin. - Jerky 11/11/99
(7)
- Inable spinner in Galaga? (and some Opti-Mame questions) - Tom61 11/11/99
(2)
- What about a four player cabinate? - onion 11/11/99
(3)
- Welcome Back Saint - Ray Iddings 11/11/99
(0)
- Anyone have pics on using Gravis Gamepad pro as joy hack(more) - NIVO 11/11/99
(0)
- The ATI cards & ArcOS & Mame - Acur8 11/11/99
(1)
- Next version of Opti-MAME will support... - Andy Geez 11/10/99
(11)
- Counter Top Cabinet - Cutter 11/10/99
(3)
- Tech tip: power rotating monitor - Jerky 11/10/99
(3)
- Planar vs. Linear video modes... - Joe 11/09/99
(0)
- Hagstrom KE18 ??? - Cablouie 11/04/99
(0)
Post A Message!
--
Home --
Scripts and WWWBoard created by Matt Wright and can be found at Matt's
Script Archive