Build Your Own Arcade Controls message board

Build Your Own Arcade Controls
Message Boards

SEARCH

RULES

ARCHIVES

Chat Room
Chats daily @ 9 PM Eastern

- Freeze menu frame -

Main Board

Forums for the discussion of building genuine arcade controls for use with personal computers.
Forums marked with a * above belong to other web sites and are not hosted by BYOAC.

[ Post Message ] [ Help]

coin thing - Bozo Joe 9/24/2000 (0)
Lighted leaf switch buttons for sale - Andy Desak 9/24/2000 (1)
- Re: Lighted leaf switch buttons for sale - Andy Desak 9/24/2000 (0)
MAX Cable lengths - CJ 9/24/2000 (1)
- Partial answer. - Just Michael 9/24/2000 (0)
Robotron 3000 MAME Machine - Work in Progress - Zapper 9/24/2000 (0)
Mame cabinet sideart on ebay if anyone is interested. - -Ace- 9/23/2000 (4)
- Re: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=447910796 - -Ace- 9/23/2000 (3)
  - Re: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=447910796 - Just Michael 9/24/2000 (2)
    - Re: Just Michael. . . - -Ace- 9/24/2000 (1)
      - Re: Just Michael. . . - Just Michael 9/24/2000 (0)
Glass vs. Plexi-glass for monitor bezel - Bill W 9/23/2000 (2)
- Re: Glass vs. Plexi-glass for monitor bezel - Zapper 9/23/2000 (0)
- PS I realize that glass and bezel aren't the same thing. - Bill W 9/23/2000 (0)
WeBSiTE! - Stan 9/22/2000 (2)
- Re: WeBSiTE! - Retrocactus 9/22/2000 (1)
  - Re: WeBSiTE! - Excelent!!! - Stan 9/22/2000 (0)
Page Faulting demons begone. I beseech you to look at my system setup and tell me the error of my ways - johnmac 9/22/2000 (9)
- I just bought another 64mb of ram...looks lie 64mb was not enough for mslug2!! - johnmac 9/24/2000 (0)
- Re: Page Faulting demons begone. I beseech you to look at my system setup and tell me the error of my ways - Tom A. 9/24/2000 (0)
- Re: Page Faulting demons begone. I beseech you to look at my system setup and tell me the error of my ways - Sy 9/22/2000 (0)
- Obviously NOT! - Stan 9/22/2000 (2)
  - Gee STAN, thanks, but how about some help? - john mac 9/22/2000 (1)
    - Ok, Gee Wizz.... :-) - Stan 9/22/2000 (0)
- Re: Page Faulting demons begone. I beseech you to look at my system setup and tell me the error of my ways - Sithspawn 9/22/2000 (0)
- Do this insted. - c0nsumer 9/22/2000 (1)
  - Oops. I still left too much garbage in there... - c0nsumer 9/22/2000 (0)
Universal Front-End? - Paul 9/21/2000 (2)
- Re: Universal Front-End? - Sithspawn 9/22/2000 (1)
  - Re: Universal Front-End? - Paul 9/23/2000 (0)
ArcadeOS + VSyncMame? Or some other front end? - Rockin' G 9/21/2000 (0)
vertical games on a horizontal monitor - p-man 9/21/2000 (6)
- Yes it's possible - Elvis_P 9/21/2000 (0)
- It's next to impossible... - robert mcelwee 9/21/2000 (4)
  - Re: It's next to impossible... - Stan 9/21/2000 (3)
    - Re: It's next to impossible... - robert mcelwee 9/22/2000 (0)
    - ^ It's NOT next to impossible... *NT* - Stan 9/21/2000 (1)
      - I can help U all but you have to pay me! hehehehehe - Nick Bourdo 9/23/2000 (0)
Help - Kensington Expert Mouse/Trackball - Dave 9/21/2000 (0)
List of games that support cocktail mode? - Rockin' G 9/21/2000 (3)
- Re: List of games that support cocktail mode? - $#@%$^#%%#%# 9/21/2000 (0)
- Re: List of games that support cocktail mode? - Just Michael 9/21/2000 (0)
- sure, easy... - bill connolly 9/21/2000 (0)
One more question on the "OK" screens and recompiling MAME - RoarCade 9/21/2000 (3)
- Re: One more question on the "OK" screens and recompiling MAME - Just Michael 9/21/2000 (2)
  - Re: One more question on the - Furluge 9/23/2000 (1)
    - Re: One more question on the - Cliff 9/23/2000 (0)
New keyboard encoder available. - Marshall 9/21/2000 (2)
- anyone getting one of these? if so please give us a review :-)*nt* - exph 9/22/2000 (0)
- very cool! *NT* - Stan 9/21/2000 (0)
Crazy thoughts on shifters for driving games - Marshall 9/21/2000 (1)
- Re: Crazy thoughts on shifters for driving games - Tom61 9/21/2000 (0)
PAGE FAULTS!! Why can't I fix this??? - johnmac 9/21/2000 (0)
Page faults... - jmark 9/21/2000 (8)
- QEMM 8.0 - johnmac 9/21/2000 (1)
  - Re: QEMM 8.0 - Stan 9/22/2000 (0)
- This should be why... - Stan 9/21/2000 (3)
  - Release 5 - jmark 9/21/2000 (2)
    - Re: Release 5 - Here ya go... - Stan 9/21/2000 (1)
      - Thanks... works perfectly now!! - jmark 9/22/2000 (0)
- Re: Page faults... - Rockin' G 9/21/2000 (1)
  - Re: Page faults... - UMBPCI - Stan 9/21/2000 (0)
a perfect working blockade cocktail table - qbus 9/20/2000 (1)
- Re: a perfect working blockade cocktail table - JP4 9/20/2000 (0)
Where can I find a PDPI Lightning 4? Where I've looked inside... - CJ 9/20/2000 (1)
- Re: Where can I find a PDPI Lightning 4? Where I've looked inside... - Just Michael 9/20/2000 (0)
next gen powerglove - AUX 9/20/2000 (1)
- Re: next gen powerglove - bill 9/20/2000 (0)
Examples of 19" vertical driving cabinets? - robert mcelwee 9/20/2000 (0)
Examples of removable control panels ? - robert mcelwee 9/20/2000 (3)
- Re: Examples here (more) - JP4 9/20/2000 (0)
- Re: Examples of removable control panels ? - Zapper 9/20/2000 (0)
- Re: Examples of removable control panels ? - Brian 9/20/2000 (0)
neo-geo MVS control panel overlay pic - bloodeye@tampabay.rr.com 9/20/2000 (0)
anyone try using plexiglass - flyingmachine 9/19/2000 (1)
- I have - JustinT 9/19/2000 (0)
A little OT, but I would appreciate any advice... - Mark Lord 9/19/2000 (5)
- Re: A little OT, but I would appreciate any advice... - Mark Lord 9/20/2000 (0)
- Ouch! - JP4 9/20/2000 (1)
  - Re: Ouch! - Mark Lord 9/20/2000 (0)
- Re: A little OT, but I would appreciate any advice... - Lindy 9/19/2000 (1)
  - If all else fails, there's always small claims court - SteveBills 9/20/2000 (0)
How to Switch 8way to 4way on Super Joystick? - SJ 9/19/2000 (1)
- Re: How to Switch 8way to 4way on Super Joystick? - JP4 9/20/2000 (0)
If anybody cares, experience with Radio Shack's Gameport to USB converter. - CJ 9/19/2000 (1)
- Sorry about the typos, but you can get the idea. (nt) - CJ 9/19/2000 (0)
Help: ArcadeOS losing settings - rex rogers 9/19/2000 (0)
KE72 configuration utility running in windows - Ohso 9/18/2000 (2)
- Re: KE72 configuration utility running in windows (vs. MS-DOS mode) - RoarCade 9/19/2000 (1)
  - I was referring to the serial port... - Ohso 9/19/2000 (0)
VGA to TV card with RGB and sync outputs - Furluge 9/18/2000 (3)
- Re: VGA to TV card with RGB and sync outputs - Furluge 9/20/2000 (0)
- Re: VGA to TV card with RGB and sync outputs - Just Michael 9/19/2000 (0)
- Re: VGA to TV card with RGB and sync outputs - ted 9/19/2000 (0)
Cabinet Gaming in Baltimore Sun - p bock 9/18/2000 (1)
- Re: Cabinet Gaming in Baltimore Sun - Brian 9/19/2000 (0)
Monitor Discharge: Unplug Everything First? - Tom A. 9/18/2000 (2)
- NO! :-) (Zappp...) - Stan 9/18/2000 (1)
  - Re: NO! :-) (Zappp...) - Tom61 9/18/2000 (0)
Happ Ultimate Joysticks - 4 way/8 way question - ChrisW 9/18/2000 (1)
- Re: Happ Ultimate Joysticks - 4 way/8 way question - Ryan 9/20/2000 (0)
possible I-PAC, AOS or MAME problem - Chris Wilson 9/18/2000 (1)
- Re: possible I-PAC, AOS or MAME problem - bill connolly 9/19/2000 (0)
Fast enough for NeoGeo? - jimmy 9/18/2000 (4)
- Re: Fast enough for NeoGeo? - henri 9/18/2000 (0)
- Re: Fast enough for NeoGeo? - mattv 9/18/2000 (2)
  - Re: Fast enough for NeoGeo? - Mike Bissett 9/19/2000 (1)
    - I agree - RoarCade 9/19/2000 (0)
KE72 Config program - RoarCade 9/18/2000 (2)
- Here you go... - Sithspawn 9/18/2000 (1)
  - Re: Here you go... - RoarCade 9/19/2000 (0)
Monitor adjustments - Cliff 9/18/2000 (0)
Happ 4-way/8-way joysticks - ChrisW 9/18/2000 (1)
- Re: Happ 4-way/8-way joysticks - Jim Putman 9/18/2000 (0)
Control PC games with arcade joystick? - chukdotcom 9/18/2000 (1)
- try keystroke emulators *more inside* - exph 9/18/2000 (0)
Anyone Use an I810 board with intergrated AV for ArcadeOS/MAME? - Jas 9/17/2000 (2)
- On-Board Sound problems - Stan 9/18/2000 (1)
  - Re: On-Board Sound problems - Jas 9/20/2000 (0)
Pictures of custom PCB for wiring KE-72 - Dave Dribin 9/17/2000 (0)
No more spinner orders - Fultra 9/17/2000 (2)
- Re: No more spinner orders - edstir 9/17/2000 (0)
- Re: No more spinner orders - Zapper 9/17/2000 (0)
Lynx says this page is 110 pages long, trim plz :) - Rob Caskey (staticx) 9/17/2000 (3)
- Re: Lynx says this page is 110 pages long, trim plz :) - Just Michael 9/17/2000 (2)
  - It gives me problems too - JustinT 9/18/2000 (1)
    - saint gets the hint :) - saint 9/18/2000 (0)
Built ArcadeOS printer hardware - but on cold boot, defaults to ON! - Edge 9/17/2000 (1)
- Re: Built ArcadeOS printer hardware - but on cold boot, defaults to ON! - Bill Lash 9/17/2000 (0)
Please help - Jeff Rondeau 9/17/2000 (0)
Evil JAMMA+ Connecter - Furluge 9/16/2000 (5)
- Re: Evil JAMMA+ Connecter - Furlgue 9/20/2000 (0)
- Re: Evil JAMMA+ Connecter - Mike Bissett 9/19/2000 (0)
- Re: Evil JAMMA+ Connecter - Mabelle 9/18/2000 (0)
- Re: Evil JAMMA+ Connecter - knohbody 9/16/2000 (0)
- Re: Evil JAMMA+ Connecter - knohbody 9/16/2000 (0)
Help! Want a controller setup with spinner and/or trackball!! - Jar Jar Stinks 9/16/2000 (2)
- Many people have been waiting for this for a long time now... - Count Flakula 9/18/2000 (1)
  - Re: Many people have been waiting for this for a long time now... - flashfrosch 9/19/2000 (0)
Happ Controls JAMMA Cable - Furluge 9/16/2000 (2)
- Re: Happ Controls JAMMA Cable - Cliff 9/18/2000 (0)
- Re: Happ Controls JAMMA Cable - Andy Geez 9/16/2000 (0)
SORRY GUYS, JUST A TEST... - Ricardo 9/16/2000 (0)
The ULTIMATE gaming monitor at last! =) - Prophet of Retrogames 9/16/2000 (6)
- Can it be rotated to play vertical games?????? - Enrique Ibarra 9/20/2000 (1)
  - Re: Can it be rotated to play vertical games?????? - Prophet of Retrogames 9/23/2000 (0)
- Re: The ULTIMATE gaming monitor at last! =) WHOOPS! - James Widmark 9/16/2000 (0)
- Re: The ULTIMATE gaming monitor at last! =) - James Widmark 9/16/2000 (0)
- Re: The ULTIMATE gaming monitor at last! =) - James Widmark 9/16/2000 (0)
- Re: The ULTIMATE gaming monitor at last! =) - xiaou2 9/16/2000 (0)
SIMPLEST way to switch 4 to 8 way (takes 3 secs.) - BillyBoy 9/15/2000 (2)
- Re: SIMPLEST way to switch 4 to 8 way (takes 3 secs.) - Tom61 9/16/2000 (1)
  - Re: SIMPLEST way to switch 4 to 8 way (takes 3 secs.) - BillyBoy 9/16/2000 (0)
Why certain games run slow and my system cfg - rurdy4me 9/15/2000 (1)
- Re: Why certain games run slow and my system cfg - Paul Dunn 9/16/2000 (0)
Running MAME with roms on CD - do they not get old? - Druin 9/15/2000 (8)
- I burn 'em onto four CDRW's... - Voch 9/21/2000 (0)
- Re: Running MAME with roms on CD - do they not get old? - Grinder 9/16/2000 (1)
  - Re: Running MAME with roms on CD - do they not get old? - Druin 9/17/2000 (0)
- Re: Running MAME with roms on CD - do they not get old? - Todd Robinson 9/15/2000 (4)
  - Re: Running MAME with roms on CD - do they not get old? - Druin 9/17/2000 (1)
    - Re: Running MAME with roms on CD - do they not get old? - Stan 9/18/2000 (0)
  - Re: Running MAME with roms on CD - do they not get old? - Stan 9/15/2000 (0)
  - Re: Running MAME with roms on CD - do they not get old? - NIVO 9/15/2000 (0)
Identifying Cabs - Furluge 9/15/2000 (3)
- Re: Identifying Cabs - jmark 9/15/2000 (0)
- Re: Identifying Cabs - MrTomcat 9/15/2000 (1)
  - Evil JAMMA+ connecter! - Furluge 9/15/2000 (0)
Those OK Buttons - a solution perhaps? - Paul Dunn 9/15/2000 (1)
- Re: Those OK Buttons - a solution perhaps? - Bart 9/16/2000 (0)
Fastest Mouse driver for DOS! - Stan 9/15/2000 (4)
- >You can find it here: ... "Where?" *NT* - EmuMannen 9/15/2000 (3)
  - Re: >You can find it here: ... "Where?" *NT* - Stan 9/15/2000 (2)
    - Re: >You can find it here: ... "Where?" *NT* - Just Michael 9/15/2000 (1)
      - Ooops! :-) - Stan 9/15/2000 (0)
Here is the BEST configuration for DOS ONLY Mame! Also how I got CWSDPMI and EMM386.EXE to work together and am now able to load ANY size game/app in my cab. - Stan 9/15/2000 (2)
- Some answers to questions I got in e-mail - Stan 9/18/2000 (0)
- Hmmm... All the tabs were stripped on the cut/paste, but I think it's readable enough - Stan 9/15/2000 (0)
Has the a Gameport to USB adapter cable been invented? (nt) - CJ 9/15/2000 (2)
- Yes, Radio Shack has them ^nt^ - tom61 9/15/2000 (1)
  - TANX (nt) - CJ 9/15/2000 (0)
updated pics on my cabinet - bill connolly 9/14/2000 (4)
- That's a HUGE monitor bezel!!! - Stan 9/15/2000 (1)
  - naw, just a small monitor! (NT) - bill connolly 9/16/2000 (0)
- looking good - exph 9/15/2000 (1)
  - Looks good Bill (the cab AND your lawn)! *NT* - JP4 9/20/2000 (0)
WTB: Wico Red ball top 4/8 way joystick - x-ian 9/14/2000 (0)
IPAC Question - Single Button for Enter - PixelPerfect 9/14/2000 (17)
- Full Solution provided by Andy - PixelPerfect 9/15/2000 (0)
- The absolute most easiest fix.... - Sy 9/14/2000 (1)
  - Re: The absolute most easiest fix.... - PixelPerfect 9/15/2000 (0)
- No proble - Andy Warne 9/14/2000 (3)
  - Re: No proble - Andy Warne 9/14/2000 (2)
    - OOPS! As I was trying to say, a Windows key remapper would do it! - Andy Warne 9/14/2000 (1)
      - Would this work? - Pixel Perfect 9/15/2000 (0)
- partial solution... - bill connolly 9/14/2000 (9)
  - Re: Thanks for that, but... - Pixel Perfect 9/14/2000 (7)
    - OK. I think I understand your problem... - bill connolly 9/14/2000 (0)
    - Re: Thanks for that, but... - Stan 9/14/2000 (5)
      - Read this quick! - Marshall 9/14/2000 (1)
        
        Re: Read this quick! - PixelPerfect 9/14/2000 (0)
      - a few bucks? Isn't the KE72 $100 and the IPAC $39? Well.. - bill connolly 9/14/2000 (2)
        
        Price check - Marshall 9/14/2000 (1)
        
        LOL. I was ready to go pick up a dozen IPACs too! LOL (nt) - bill connolly 9/14/2000 (0)
  - I agree with Bill, that is the best way to do this (n/t) - Marshall 9/14/2000 (0)
Anyone care to share the best MAME DOS config & autoexec files? - John Cousins 9/14/2000 (2)
- Re: Anyone care to share the best MAME DOS config & autoexec files? - Sy 9/15/2000 (0)
- Re: Anyone care to share the best MAME DOS config & autoexec files? - Stan 9/14/2000 (0)
Why does my post about 8 threads down (My Ideas) contain Bill Lash's comments? - Marshall 9/14/2000 (3)
- Board occasionally freaks out ... more inside... - saint 9/14/2000 (2)
  - You found the right post. (info inside) - Marshall 9/15/2000 (0)
  - Re: Board occasionally freaks out ... more inside... - Bill Lash 9/15/2000 (0)
Answers to how to get past "Press OK to continue" without using a joystick - Marshall 9/14/2000 (9)
- Re: Answers to how to get past "Press OK to continue" without using a joystick - bill connolly 9/14/2000 (8)
  - Re: Answers to how to get past "Press OK to continue" without using a joystick - malung 9/14/2000 (6)
    - Sure you could (additional comments also) - Marshall 9/14/2000 (5)
      - Just remove the code between the braces. Recompile and done. (NT) - shane 9/14/2000 (4)
        
        Can anyone pst instructions on "Recompile" (More inside) - RoarCade 9/21/2000 (1)
        
        Re: Can anyone pst instructions on "Recompile" (More inside) - Just Michael 9/21/2000 (0)
        
        Warning: The enclosed changes will void your M.A.M.E. warranty - Prefers to remain anonymous 9/14/2000 (1)
        
        Re: The EASY way! - Stan 9/15/2000 (0)
  - Interesting additional information - Marshall 9/14/2000 (0)
could use help with macros on Powerramp Mite - NThero 9/14/2000 (0)
Tech: Monitor PCB problems? - Tom A. 9/13/2000 (4)
- Re: Tech: Monitor PCB problems? - Tom A. 9/14/2000 (1)
  - Hey, Tom... - Mark Lord 9/14/2000 (0)
- Re: Tech: Monitor PCB problems? - LaserRot 9/14/2000 (0)
- Re: Tech: Monitor PCB problems? - Tom61 9/13/2000 (0)
Anybody interested in pre made PC/MAME to Jamma Adapter ? - www.arcadegame.co.uk 9/13/2000 (1)
- I would (nt) - StephenCG 9/14/2000 (0)
mame.net interesting posts - bill connolly 9/13/2000 (1)
- Re: mame.net interesting posts - Ohso 9/13/2000 (0)
Track n Field Question - bill connolly 9/13/2000 (5)
- Re: Track n Field Question - CoCoNut 9/13/2000 (1)
  - thx!! duh why didn't I think of that? (nt) - bill connolly 9/14/2000 (0)
- Re: Track n Field Question - Just Michael 9/13/2000 (2)
  - another great idea, thx... more inside... - bill connolly 9/14/2000 (1)
    - A possible solution... - Just Michael 9/14/2000 (0)
Low volume on some games? - Julo 9/13/2000 (3)
- Re: Low volume on some games? - Stan 9/15/2000 (0)
- Re: Low volume on some games? - Nickster 9/13/2000 (1)
  - Thanks, it worked well. - Julo 9/13/2000 (0)
Getting a Crystal Trackball to Work in Dos/ArcadeOS - CoCo Nut 9/12/2000 (1)
- Re: Getting a Crystal Trackball to Work in Dos/ArcadeOS - wally 9/13/2000 (0)
I'm starting to wonder what it takes to be added to the CABs list! - Stan 9/12/2000 (5)
- saint's about as efficient as a squid these days.... - saint 9/12/2000 (1)
  - Hey Saint, here is an idea! Does anyone know how they could help Saint with this? - Some Guy 9/13/2000 (0)
- ?? maybe your mail isn't getting through... - Tom61 9/12/2000 (0)
- what is your url? would like to look at your cab (nt) - bill connolly 9/12/2000 (1)
  - Re: what is your url? would like to look at your cab (nt) - Stan 9/14/2000 (0)
TO ANDY WARNE: How soon will the opti-pac be available, it sounds great-nt - NIVO 9/12/2000 (2)
- Re: OOPS!!!- I meant the Opti-pac PLUS version(sorry)-nt - NIVO 9/12/2000 (1)
  - Re: OOPS!!!- I meant the Opti-pac PLUS version(sorry)-nt - Andy Warne 9/14/2000 (0)
played my first game on my new cab :) - CW85T-Type 9/12/2000 (2)
- Re: played my first game on my new cab :) - JP4 9/13/2000 (0)
- Re: played my first game on my new cab :) - Stan 9/12/2000 (0)
O.K. - Here's a strange one for you guys (monitor problem) - PacFan 9/12/2000 (5)
- Thanks Guys - Twisting the two sync wires together did it! - Now if I could just fix the 'pincushon'... :) (n/t) - PacFan 9/13/2000 (0)
- Twist the two syncs together ^nt^ - Tom61 9/12/2000 (3)
  - Re: Twist the two syncs together ^nt^ - Julo 9/12/2000 (2)
    - Re: Twist the two syncs together - Tom61 9/12/2000 (1)
      - Re: Twist the two syncs together - MrTomcat 9/13/2000 (0)
Sony GDM-1950 19" monitor. GO/NO GO? - bernard 9/12/2000 (5)
- Re: Sony GDM-1950 19" monitor. GO/NO GO? - bernard 9/12/2000 (0)
- Re: Sony GDM-1950 19" monitor. GO/NO GO? - wally 9/12/2000 (3)
  - Re: Sony GDM-1950 19" monitor. GO/NO GO? - itchy 9/12/2000 (2)
    - Approaches to Using Fixed Frequency or Non-Standard Monitors on PCs - EmuMannen 9/12/2000 (1)
      - Circuits for driving fixed frequency monitors - EmuMannen 9/12/2000 (0)
I know the Ipac page is down, Is there a new link or?????-nt - NIVO 9/11/2000 (3)
- Re: I know the Ipac page is down, Is there a new link or?????-nt - Andy Warne 9/12/2000 (0)
- http://www.spaceinvaders.uk.com/ - JustinT 9/12/2000 (1)
  - Re: Thanks Justin-nt - NIVO 9/12/2000 (0)
Where can I get the right kind of terminal connects other than Radio Shack? I think it was posted here at one time. - rurdy4me 9/11/2000 (7)
- Also, Digi-key and some Ace Hardwares. (n/t) - Marshall 9/12/2000 (3)
  - Link is here - Marshall 9/12/2000 (1)
    - Re: Link is here - marshall 9/12/2000 (0)
  - Link is here - Marshall 9/12/2000 (0)
- Re: Where can I get the right kind of terminal connects other than Radio Shack? I think it was posted here at one time. - Slim Jim 9/12/2000 (2)
  - Re: Where can I get the right kind of terminal connects other than Radio Shack? I think it was posted here at one time. - Bill Lash 9/12/2000 (1)
    - Thanks guys for the info - rurdy4me 9/12/2000 (0)
Anyone live in the Oklahoma City area and want a cabinet for $25. I know of a guy that has 5 of them but won't last for long? I picked up one myself the other day. - rurdy4me 9/11/2000 (1)
- Re: Anyone live in the Oklahoma City area and want a cabinet for $25. I know of a guy that has 5 of them but won't last for long? I picked up one myself the other day. - Specktor 9/12/2000 (0)
Tech question: Power supplies. . . . . - -Ace- 9/11/2000 (2)
- Re: Tech question: Power supplies. . . . . - Xiaou2 9/11/2000 (1)
  - Re: Tech question: Power supplies. . . . . - -Ace- 9/11/2000 (0)
Gonna start wiring this weekend (hopefully) - BiG^DoG 9/11/2000 (14)
- My ideas. - Marshall 9/12/2000 (0)
- Mr. Salty's got a good example of using IDE ribbon (*more*) - JP4 9/12/2000 (0)
- Built a custom PCB to help wiring with KE-72 - Dave Dribin 9/11/2000 (3)
  - Correcting a misconception here (seems to be fairly common) - Tom61 9/11/2000 (2)
    - Re: Correcting a misconception here (seems to be fairly common) - Just Michael 9/11/2000 (0)
    - You are correct.... - Dave Dribin 9/11/2000 (0)
- Re: Gonna start wiring this weekend (hopefully) - Fultra 9/11/2000 (7)
  - Re: Gonna start wiring this weekend (hopefully) - BiG^DoG 9/11/2000 (6)
    - Re: Gonna start wiring this weekend (hopefully) - Just Michael 9/11/2000 (0)
    - 2 IDE cables - 36 inputs per cable - Dave Dribin 9/11/2000 (4)
      - Re: 2 IDE cables - 36 inputs per cable - BiG^DoG 9/11/2000 (3)
        
        Re: 2 IDE cables - 36 inputs per cable (Heres what I plan on doing) - JP4 9/11/2000 (2)
        
        That's basically what I thought - BiG^DoG 9/12/2000 (1)
        
        Re: That's basically what I thought - Bill Lash 9/12/2000 (0)
ashura blaster's deep switches assignment - keri 9/10/2000 (0)
BlackBox MAME controller page up. Screenhots >> - JustinT 9/10/2000 (2)
- Suh-weet! - Mark Lord 9/11/2000 (0)
- Re: BlackBox MAME controller - mckechnossomy 9/10/2000 (0)
Happ Ultimate joysticks too soft... - henri 9/10/2000 (2)
- Try some joysticks in your arcade, then buy - santi 9/12/2000 (0)
- Re: Happ Ultimate joysticks too soft... - NIVO 9/10/2000 (0)
Playstation 2 seater driving cabinet - Glenise 9/10/2000 (1)
- Re: Playstation 2 seater driving cabinet - AUX 9/11/2000 (0)
FS: Orig arcade manuals - Fultra 9/10/2000 (0)
Video (negative or positive signal)? - Julo 9/10/2000 (0)
some questions about IPAC - NThero 9/10/2000 (3)
- Re: some questions about IPAC - Retrocactus 9/10/2000 (0)
- Re: some questions about IPAC - Ryan 9/10/2000 (1)
  - Here's a pic - BillyBoy 9/10/2000 (0)
lp24 encoder----delay?? - Flynn!!!! 9/10/2000 (1)
- Re: lp24 encoder----delay?? - Fultra 9/10/2000 (0)
How do you get soundblaster live to work in pure dos with mame?? (NT) - shane 9/09/2000 (0)
Why paint your cabinet? - Todd Munro 9/09/2000 (6)
- For blue, green, red, purple, yellow, orange, indigo, brown, pink, maroon, hunter green, sky blue, etc, etc..... DUH! - Agent Smartass 9/17/2000 (1)
  - Don't forget polka-dots... - Just Michael 9/17/2000 (0)
- Re: Why paint your cabinet? - Grinder 9/16/2000 (0)
- Re: Why paint your cabinet? - YtseBadd 9/12/2000 (0)
- Re: Why paint your cabinet? - Just Michael 9/09/2000 (0)
- Re: Why paint your cabinet? - blag 9/09/2000 (0)
"OK" disclaimer screen in MAME - Paul 9/09/2000 (2)
- Left then Right (NT) - Just Michael 9/09/2000 (1)
  - Thanks!! So easy How could I have Missed It. - Paul 9/09/2000 (0)
In your opinion would having 224megs of 66mhz ram be ok for running a MAME cabinet or should I stick with PC-100 solely? - rurdy4me 9/09/2000 (4)
- It all depends upon what games you wish to run. - Just Michael 9/09/2000 (3)
  - Re: It all depends upon what games you wish to run. - Grinder 9/16/2000 (0)
  - Twice as fast? Not exactly... - Fultra 9/10/2000 (1)
    - Re: Twice as fast? Not exactly... - Todd Robinson 9/15/2000 (0)
Cant take my mame cab with me when i move.... - john mac 9/08/2000 (1)
- darn it! - Tom61 9/08/2000 (0)
Anyone painted they're cabs?. . . . - -Ace- 9/08/2000 (5)
- What primer or sealer should be used before painting on particle board?? (nt) - Brian 9/08/2000 (0)
- Re: Anyone painted they're cabs?. . . . - PacFan 9/08/2000 (0)
- Re: Anyone painted they're cabs?. . . . - siritchy 9/08/2000 (2)
  - Re: Thanks for the comments. . you too Packer fan. . Ha Ha ;) -Nt- - -Ace- 9/08/2000 (1)
    - Re: BOO!!!!!! GO LIONS!!!!! LOL-nt - NIVO 9/08/2000 (0)
Mame + Arcade Monitor + 16bit color modes... - Patrik Lantz 9/08/2000 (3)
- What type of video card are you using? nt - Ryan 9/09/2000 (2)
  - MATROX G200 AGP, 4MB.... - Patrik 9/09/2000 (1)
    - Re: MATROX G200 AGP, 4MB.... - Ryan 9/09/2000 (0)
PSX GunCon support in Allegro & MAME - AUX 9/08/2000 (0)
Flight yoke pots - Grantys 9/08/2000 (2)
- Re: Flight yoke pots - Fultra 9/08/2000 (1)
  - Star Wars Flight yoke pots - Jude A. Kelley 9/11/2000 (0)
older versions of vsyncmame - p-man 9/08/2000 (0)
Please give me your thoughts on the price of this computer for my MAME cab... - Bill W 9/08/2000 (3)
- Re: Look at this link(inside)................ - NIVO 9/09/2000 (0)
- Price watch is an awesome site for comparison - john macmichael 9/09/2000 (0)
- Re: Please give me your thoughts on the price of this computer for my MAME cab... - Fultra 9/08/2000 (0)
Another quick WG U3100 Question... - jmark 9/08/2000 (2)
- Re: Another quick WG U3100 Question... - john mac 9/08/2000 (0)
- Re: Another quick WG U3100 Question... - Dave Dribin 9/08/2000 (0)
ARCADEOS PRNTER HARDWARE...Doesn't anyone have any info? - john mac 9/07/2000 (5)
- Alternate solution < $20 - Dr D 9/08/2000 (0)
- Re: ARCADEOS PRNTER HARDWARE.. Some tips... - Patrik Lantz 9/08/2000 (3)
  - It works great, but not with problems with the PC's motherboard - Nick Bourdo 9/08/2000 (2)
    - Re: It works great, but not with problems with the PC's motherboard - Patrik Lantz 9/08/2000 (1)
      - Re: It works great, but not with problems with the PC's motherboard - Nick Bourdo 9/09/2000 (0)
8-pin VTR terminal (better diagram) - Shea 9/07/2000 (3)
- It might be this? - Ryan 9/09/2000 (2)
  - Re: It might be this? Take 2 - Ryan 9/09/2000 (1)
    - Re: It might be this? Take 2 - Shea 9/13/2000 (0)
8-pin VTR terminal - Shea 9/07/2000 (0)
Tv to rbg? - knohbody 9/07/2000 (2)
- Re: Tv to rbg? - LuSiD 9/08/2000 (1)
  - Re: Tv to rbg? - knohbody 9/08/2000 (0)
Black 3/4" T-Moulding for Sale - c0nsumer 9/07/2000 (0)
control panel decals? - knohbody 9/07/2000 (3)
- Try the WICO website... - bill connolly 9/07/2000 (2)
  - Try Video Connection Web site - Ryan 9/09/2000 (0)
  - Thanx. - knohbody 9/07/2000 (0)
Trackball and spinner at the same time - BiG^DoG 9/07/2000 (18)
- Couldn't you do one PS/2 and one serial? - Edge 9/07/2000 (0)
- Here is what I did and it works great - Stan 9/07/2000 (9)
  - You are right, but.... - Fultra 9/07/2000 (6)
    - Re: You are right, but.... - BiG^DoG 9/08/2000 (5)
      - Let me clarify.... - Fultra 9/08/2000 (4)
        
        Re: Let me clarify.... (THIS IS WHY!) - Stan 9/08/2000 (3)
        
        Says who? The ME4 and "T" are the same thing. - Fultra 9/08/2000 (2)
        
        Re: Says who? The ME4 and "T" are the same thing. - Stan 9/11/2000 (0)
        
        Re: Says who? The ME4 and "T" are the same thing. - Stan 9/11/2000 (0)
  - This sounds great but... - BiG^DoG 9/07/2000 (1)
    - Re: This sounds great but... - Stan 9/08/2000 (0)
- Re: Trackball and spinner at the same time - Marshall 9/07/2000 (0)
- Re: Trackball and spinner at the same time - RoarCade 9/07/2000 (5)
  - Re: Trackball and spinner at the same time - BiG^DoG 9/07/2000 (3)
    - Sorry, flubbed the link - RoarCade 9/07/2000 (0)
    - Re: Trackball and spinner at the same time - RoarCade 9/07/2000 (0)
    - Y Mouse - Dr D 9/07/2000 (0)
  - I vote for the Y Mouse too.... - Dr D 9/07/2000 (0)
Questions about the KE72T - BiG^DoG 9/07/2000 (4)
- Re: Questions about the KE72T - Fultra 9/07/2000 (2)
  - Re: Questions about the KE72T - BiG^DoG 9/08/2000 (1)
    - Re: Questions about the KE72T - Fultra 9/08/2000 (0)
- Re: Questions about the KE72T - c0nsumer 9/07/2000 (0)
TV vs VGA Monitor why argue GET BOTH - Rockin' 9/06/2000 (0)
Power supply question? - ItzMR2u 9/06/2000 (1)
- Should be OK ^nt^ - Tom61 9/07/2000 (0)
Remapping IPAC keys in DOS and Windows - Retrocactus 9/06/2000 (1)
- Re: Remapping IPAC keys in DOS and Windows - )p( 9/07/2000 (0)
Here is where to get the latest version of CWSDPMI :-) - Stan 9/06/2000 (0)
Arcade monitor & color depth - Tony Wu 9/06/2000 (1)
- Re: Arcade monitor & color depth - Stan 9/06/2000 (0)
WG D9100 vs U3100 - jmark 9/06/2000 (12)
- Folks, THANKS for all the great input - it looks like the U3100 is the winner!!! - jmark 9/06/2000 (0)
- Re: WG D9100 vs U3100 - )p( 9/06/2000 (2)
  - Degaussing? - jmark 9/06/2000 (1)
    - Re: Degaussing? - )p( 9/06/2000 (0)
- Dot pitch is different - Dave Dribin 9/06/2000 (2)
  - Re: Dot pitch is different - )p( 9/06/2000 (1)
    - Re: Dot pitch is different - Dave Dribin 9/08/2000 (0)
- Re: WG D9100 vs U3100 - Fultra 9/06/2000 (2)
  - Re: WG D9100 vs U3100 - jmark 9/06/2000 (1)
    - Re: WG D9100 vs U3100 - Fultra 9/06/2000 (0)
- URL to the D3100? - Edge 9/06/2000 (1)
  - Re: URL to the D3100? - jmark 9/06/2000 (0)
ArcadeOS and ZSNES questions? - Mark 9/06/2000 (0)
Need a faster computer? - Just Michael 9/06/2000 (3)
- Re: Need a faster computer? - Stan 9/06/2000 (0)
- Now *that* would run every game at full speed! ^nt^ - Tom61 9/06/2000 (0)
- Re: Need a faster computer? - Dumpster Tom 9/06/2000 (0)
Look at my mame Console! - 6 MB mpeg capture inside. - JustinT 9/05/2000 (5)
- Re: Look at my mame Console! - 6 MB mpeg capture inside. - mckechnossomy 9/05/2000 (1)
  - Yes, I'll be adding t-Moulding :) n/t - JustinT 9/05/2000 (0)
- Re: Look at my mame Console! - 6 MB mpeg capture inside. - Fultra 9/05/2000 (1)
  - Here's how I did the top... - JustinT 9/05/2000 (0)
- Oops... links here! - JustinT 9/05/2000 (0)
Somewhat cabinet related… - bill connolly 9/05/2000 (1)
- additional info... - bill connolly 9/05/2000 (0)
Since we're on the subject of router bits - BiG^DoG 9/05/2000 (3)
- Re: Since we're on the subject of router bits - Edge 9/06/2000 (0)
- Re: Since we're on the subject of router bits - Fultra 9/05/2000 (1)
  - Cuts like butter? - Just Michael 9/05/2000 (0)
Which router bit for T-moulding? - Edge 9/05/2000 (6)
- Re: Which router bit for T-moulding? - Andy Desak 9/07/2000 (0)
- Here's the bit I used... - c0nsumer 9/05/2000 (3)
  - Thanks for the info on Outwater! - Edge 9/05/2000 (2)
    - Outwater T-moulding has a 250' minimum order - Edge 9/06/2000 (1)
      - Re: Outwater T-moulding has a 250' minimum order - c0nsumer 9/06/2000 (0)
- A tip instead of the answer - Just Michael 9/05/2000 (0)
Arcade Solutions custom controller - vespertillio 9/05/2000 (1)
- Re: Arcade Solutions custom controller - Andy Desak 9/06/2000 (0)
Dreamcast pad hacking - twin sticks? - AUX 9/05/2000 (1)
- Re: Dreamcast pad hacking - twin sticks? - mckechnossomy 9/05/2000 (0)
How to hide custom lists in ArcadeOS? - bill connolly 9/05/2000 (2)
- Re: How to hide custom lists in ArcadeOS? - Ryan 9/05/2000 (1)
  - thanks for the info (nt) - bill connolly 9/06/2000 (0)
Questions on Pedals for Driving Games - Marshall 9/05/2000 (0)
Just got 19" Arcade Monitor Working - John Cousins 9/05/2000 (1)
- Re: Just got 19" Arcade Monitor Working - Ryan 9/09/2000 (0)
Need info on hacked mouse into spinner(ps/2 style) -in..... - NIVO 9/05/2000 (1)
- Re: Need info on hacked mouse into spinner(ps/2 style) -in..... - Fulton 9/06/2000 (0)
How to disable Windows Hot Keys? - Mark 9/05/2000 (2)
- Suggestion - Marshall 9/05/2000 (1)
  - Re: Suggestion - Mark 9/05/2000 (0)
S-VIDEO KICKS ASS!!!! - Brian 9/05/2000 (3)
- Re: S-VIDEO KICKS ASS!!!! - Just Michael 9/05/2000 (2)
  - Re: S-VIDEO KICKS ASS!!!! - Nickster 9/06/2000 (1)
    - Good idea guys! :) - Brian 9/08/2000 (0)
A few questions.... - Dumpster Tom 9/04/2000 (1)
- Re: A few questions.... - Dasme 9/05/2000 (0)
S-Video from computer to mame T.V. ?? - Brian 9/04/2000 (8)
- Re: S-Video from computer to mame T.V. ?? - shane 9/04/2000 (2)
  - Re: S-Video from computer to mame T.V. ?? - MannyTC 9/04/2000 (1)
    - Re: S-Video from computer to mame T.V. ?? - shane 9/05/2000 (0)
- Re: S-Video from computer to mame T.V. ?? - Prophet of Retrogames 9/04/2000 (4)
  - Re: S-Video from computer to mame T.V. ?? - Voch 9/05/2000 (3)
    - Forgot to ask...How much $$ ?? (nt) - Brian 9/05/2000 (1)
      - They're generally $130 from major online places... - Voch 9/06/2000 (0)
    - Thanks, I'll definately keep that in mind (nt) - Brian 9/05/2000 (0)
Do cordless keyboards work with I-PAC?? - ChrisW 9/03/2000 (2)
- Yes it does! - Retrocactus 9/05/2000 (0)
- I do believe that it will... - Dasme 9/05/2000 (0)
Ram Question? - rurdy4me 9/03/2000 (1)
- Not the answer - Just Michael 9/03/2000 (0)
Help with arcadeos and errors in dos mode - Sy 9/03/2000 (3)
- Change the Stacks to be the value 20 ? nt - Ryan 9/09/2000 (0)
- Re: Help with arcadeos and errors in dos mode - JIMI 9/07/2000 (0)
- Re: HERE!!!!! - JIMI 9/06/2000 (0)
Help with arcadeos and errors in dos mode - Sy 9/03/2000 (3)
- Here is what works for me - Stan 9/05/2000 (1)
  - Re: Here is what works for me - Sy 9/05/2000 (0)
- Sorry about the double post, Hit the refresh button on the wrong screen! (nt) - Sy 9/03/2000 (0)
HAPPS 3 inch trackball for sale on ebay - john mac 9/03/2000 (0)
Good place to get MAME screenshots for AOS? - noeltox 9/03/2000 (2)
- Re: Good place to get MAME screenshots for AOS? - Just Michael 9/03/2000 (1)
  - JustMichael, you're absolutely right! Thanks. (nt) - noeltox 9/03/2000 (0)
Genecyst or KGen in a cab, questions (read on) - EmuMannen 9/03/2000 (0)
How do I rotate AOS (not a game, the menu) - robert mcelwee 9/03/2000 (3)
- Press the space bar (button 3) once for left, twice for right. nt - Ryan 9/03/2000 (2)
  - Thanks! But now all my snapshots are sideways??? - robert mcelwee 9/03/2000 (1)
    - Re: Thanks! But now all my snapshots are sideways??? - Ryan 9/04/2000 (0)
10"-12" pc monitors - Tinker 9/02/2000 (2)
- Re: 10"-12" pc monitors - EmuMannen 9/03/2000 (1)
  - Re: 10"-12" pc monitors - Tinker 9/03/2000 (0)
Can you rotate games using ArcadeOS? And how to do it? - rurdy4me 9/02/2000 (1)
- I found out...thanks anyways ;) - rurdy4me 9/02/2000 (0)
A few questions... - Dumpster Tom 9/02/2000 (1)
- Re: A few questions... - Dumpster Tom 9/04/2000 (0)
tekken tag arcade board... - iguana storm 9/02/2000 (0)
Arcadeos Printer hardware project...Has anyone built it? Lets try and get it documented so anyone can build it. - john mac 9/02/2000 (2)
- Re: Arcadeos Printer hardware project...Has anyone built it? Lets try and get it documented so anyone can build it. - Patrik Lantz 9/04/2000 (1)
  - Can you post the IC's , and circuit you used or make them available via email and I will post them? - john mac 9/04/2000 (0)
Sound from onboard motherboard (ABIT) - john mac 9/01/2000 (0)
Premade mame joysticks like the hotrod but need more - Vespertillio 9/01/2000 (4)
- Re: Premade mame joysticks like the hotrod but need more - Anxious as well... 9/02/2000 (3)
  - Stick-It II has "said" they were coming out in April since February 2000, (n/t) - Marshall 9/05/2000 (2)
    - Re: I get bounced back emails when I send them questions - zizzybaloobah 9/05/2000 (1)
      - Re: I get bounced back emails when I send them questions - Is anyone alive at that site?? 9/12/2000 (0)
I-PAC home page is GONE. - justinT 9/01/2000 (2)
- Yes it's down! - Andy Warne 9/02/2000 (0)
- Re: I-PAC home page is GONE. - mckechnossomy 9/01/2000 (0)
MAME joystick setup question - noeltox 9/01/2000 (9)
- Possible simpler solution - Marshall 9/05/2000 (0)
- Interesting question (read on) - EmuMannen 9/01/2000 (7)
  - Re: Interesting question (read on) - wally 9/01/2000 (5)
    - Re: Interesting question (read on) - EmuMannen 9/02/2000 (4)
      - Help with MAME source (read on) - EmuMannen 9/02/2000 (3)
        
        Re: Help with MAME source (read on) - Bill Lash 9/02/2000 (2)
        
        Re: Help with MAME source (read on) - EmuMannen 9/03/2000 (0)
        
        Re: Help with MAME source (read on) - Bill Lash 9/02/2000 (0)
  - Re: Interesting question (read on) - noeltox 9/01/2000 (0)
Are the balls on the Wico 8/4 way leaf sticks removable? - Agent Davis 9/01/2000 (1)
- Re: Are the balls on the Wico 8/4 way leaf sticks removable? - )p( 9/01/2000 (0)
ps2 keyboard hack problem please help. -