Message Board
 
A forum for the discussion of building genuine arcade controls for use with personal computers.

---

[ Post Message ] [ Help]

---

• New message board feature - saint 11/25/99 (0)

• test - saint 11/25/99 (0)

• Monitor output problem - Gary Pranzo 11/24/99 (2)
  • Re: Monitor output problem - Andy Geez 11/24/99 (1)
    • Re: Monitor output problem - Gary Pranzo 11/24/99 (0)

• A simple question needs a simple answer. . . - -Ace- 11/24/99 (2)
  • Re: A simple question needs a simple answer. . . - Odie 11/24/99 (0)
  • I had the same problem - Once I deleted my .cfg files, it seemed to be o.k. (nt) - PacFan 11/24/99 (0)

• I just want to take a second and wish everyone a Happy Thanksgiving! - PacFan 11/24/99 (2)
  • Four days off! - Driph 11/24/99 (0)
  • Re: Gibblits..Its a fun word to say !! - Ray Iddings 11/24/99 (0)

• Saint! - I may have the last two cabinet projects you are looking for! (if that's ok) - PacFan 11/24/99 (2)
  • Ack! Please assume I didn't get them and resend! Re: Saint! - I may have the last two cabinet projects you are looking for! (if that's ok) - saint 11/24/99 (1)
    • Re: Will do immediately!! (thanks) =) (nt) - Pac Fan 11/24/99 (0)

• hotrod compatability.. - robin 11/24/99 (1)
  • Re: hotrod compatability.. - saint 11/24/99 (0)

• Help with arcade monitor to PC vid card - onion 11/23/99 (1)
  • Re: Help with arcade monitor to PC vid card - Mr SaLTy 11/24/99 (0)

• Hey Jim K... - Torgo 11/23/99 (1)
  • Re: Hey Jim K... - Jim K 11/23/99 (0)

• ACT FAST!!!! Free cab w/monitor in NY - Joe 11/23/99 (0)

• Put up a site - Tom61 11/23/99 (0)

• mame crash - Odie 11/23/99 (3)
  • Re: mame crash - Odie 11/23/99 (0)
  • Go into Mame's shortcut (right click-choose properties), click the Misc tab and uncheck all the "Windows shortcut keys" combinations ^nt^ - Tom61 11/23/99 (0)
  • Re: mame crash - John 11/23/99 (0)

• MAME screenshot archive - Cablouie 11/22/99 (0)

• Mutilator - ray iddings 11/22/99 (2)
  • What was the game? - Joe 11/23/99 (0)
  • No, you're not, you didn't throw away the PCB, and I have the monitor :) - Tom61 11/22/99 (0)

• New feature - victims... er ... testers wanted - saint 11/22/99 (0)

• Looks like people are going to need foot pedals for their cabinets. - Just Michael 11/22/99 (14)
  • Re: Looks like people are going to need foot pedals for their cabinets. - Tom61 11/22/99 (1)
    • Pole Position is a dual pot pedal game with a 360 optical wheel. *NT* - Andy 11/23/99 (0)
  • Re: Looks like people are going to need foot pedals for their cabinets. - ChrisW 11/22/99 (0)
  • At the risk of going against the spirit of "Build" Your Own.... - Don 11/22/99 (1)
    • Re: At the risk of going against the spirit of "Build" Your Own.... - Tom61 11/22/99 (0)
  • Well, there goes a new section :) Re: Looks like people are going to need foot pedals for their cabinets. - saint 11/22/99 (8)
    • Re: Well, there goes a new section :) Re: Looks like people are going to need foot pedals for their cabinets. - Torgo 11/22/99 (3)
      • More wiring info requested - Joe 11/23/99 (2)
        • Re: More wiring info requested - Torgo 11/23/99 (1)
          • Furthermore - Torgo 11/23/99 (0)
    • Re: Well, there goes a new section :) Re: Looks like people are going to need foot pedals for their cabinets. - =-JacK-= 11/22/99 (3)
      • Re: Well, there goes a new section :) Re: Looks like people are going to need foot pedals for their cabinets. - Andy Geez 11/22/99 (0)
      • Re: Well, there goes a new section :) Re: Looks like people are going to need foot pedals for their cabinets. - Andy Geez 11/22/99 (1)
        • Shifters... - xiaou2 11/23/99 (0)

• $12 ATI Mach 64 PCI video cards - Ryan Osborn 11/22/99 (0)

• Email? Can anyone email me at saint@null.net or is that broken? - saint 11/22/99 (2)
  • Re: Email? Can anyone email me at saint@null.net or is that broken? - Mark Thomas 11/22/99 (1)
    • Follow the bouncing email :) - saint 11/22/99 (0)

• SVGA-arcade monitor-or TV, which should I use (long:P) - immorta 11/22/99 (1)
  • Yeah send me the details - Nick 11/22/99 (0)

• ANDY.. It was like plug and play but the 16 bit didn't work. - Nick 11/22/99 (0)

• Front Line w/ trackball? - JP4 11/22/99 (0)

• Diamond Viper 550 cards with TV out suck without a monitor hooked up - Jim K 11/21/99 (2)
  • Have you tried this? - Torgo 11/22/99 (1)
    • Re: Have you tried this? Yes, Thankyou - Jim K 11/23/99 (0)

• problem with hagstrom encoder... - Jon 11/21/99 (5)
  • Re: problem with hagstrom encoder... - Andy 11/21/99 (4)
    • Re: problem with hagstrom encoder... - Jon 11/21/99 (3)
      • Re: problem with hagstrom encoder... - Andy 11/22/99 (2)
        • Re: problem with hagstrom encoder... - Jon 11/22/99 (1)
          • Re: problem with hagstrom encoder... - PacFan 11/24/99 (0)

• Saint my emails to you are bouncings (nt) - Ray Iddings 11/21/99 (2)
  • ARGH! Please use siredgar@mindspring.com while I beat my ISP Re: Saint my emails to you are bouncings (nt) - saint 11/21/99 (1)
    • Please forward to me an error message ... Re: ARGH! Please use siredgar@mindspring.com while I beat my ISP Re: Saint my emails to you are bouncings (nt) - saint 11/21/99 (0)

• Minimum CP hardware requirements?? - johnmac 11/21/99 (2)
  • Re: Minimum CP hardware requirements?? - JP4 11/22/99 (0)
  • Re: Minimum CP hardware requirements?? - Andy 11/21/99 (0)

• How do you control win 98 se boot sequence - Jim K 11/21/99 (4)
  • Re: How do you control win 98 se boot sequence - CAVEMAN JOE 11/21/99 (3)
    • Can do: Re: How do you control win 98 se boot sequence - saint 11/21/99 (2)
      • Re: Can do: Re: How do you control win 98 se boot sequence - Jim K. 11/21/99 (1)
        • Good luck! Re: Can do: Re: How do you control win 98 se boot sequence - saint 11/22/99 (0)

• Andy, I have a question concerning ATI videocards. . . - -Ace- 11/20/99 (1)
  • Re: Andy, I have a question concerning ATI videocards. . . - Andy 11/21/99 (0)

• Adjusting arcade monitor geometry??? - justme 11/20/99 (1)
  • oops, the ascii art didn't work... - justme 11/20/99 (0)

• Excellent suggestion for a joystick case for those in UK - CAVEMAN JOE 11/20/99 (1)
  • Re: Excellent suggestion for a joystick case for those in UK - Steb 11/21/99 (0)

• New opti-MAME for people to try that don't own an ATI mach64 and use an Arcade Monitor, -Ace- also get this file!! - Andy 11/20/99 (1)
  • -Ace- Please read.. - Andy Geez 11/20/99 (0)

• Smashtv on an arcade monitor - Macros 11/20/99 (3)
  • Re: Smashtv on an arcade monitor - Andy 11/20/99 (2)
    • Re: Smashtv on an arcade monitor - Macros 11/20/99 (1)
      • Re: Smashtv on an arcade monitor - Andy 11/20/99 (0)

• Defender layout - Ray Iddings 11/20/99 (3)
  • Re: THANKS EVERYONE 4 the posts and Emails (nt) - ray iddings 11/21/99 (0)
  • Re: Defender layout - Richard Ragon 11/21/99 (0)
  • Re: Defender layout - Mr SaLTy 11/21/99 (0)

• Good prices on Computers and Hardware - Jim M 11/20/99 (2)
  • Re: Good prices on Computers and Hardware - Pengo 11/22/99 (0)
  • Re: Good prices on Computers and Hardware - Driph 11/20/99 (0)

• New MAME site up! - PlanetMAME 11/20/99 (0)

• 100 projects? - Driph(Chris Ainsworth) 11/20/99 (0)

• My last resort!! Joystick not working in MAME with Pure DOS! - Nick 11/19/99 (1)
  • Was the SB card after all that. Replace it works good *nt* - Nick 11/20/99 (0)

• HELP!!. .Andy or anyone else. . on the topic of an ATI card. . - -Ace- 11/19/99 (9)
  • Re: furthermore. . - -Ace- 11/20/99 (8)
    • Re: furthermore. . - Andy 11/20/99 (7)
      • Re: furthermore. . - -Ace- 11/20/99 (6)
        • Re: furthermore. . - Andy 11/20/99 (5)
          • Re: furthermore. . - -Ace- 11/20/99 (4)
            • Re: furthermore. . - Andy 11/20/99 (3)
              • Re: Andy, check this out now please. . . - -Ace- 11/20/99 (2)
                • Re: Andy, I think we might have a winner!!! ;) - -Ace- 11/20/99 (1)
                  • Re: Andy, I think we might have a winner!!! ;) - Andy 11/20/99 (0)

• Mouse/trackball sensitive settings..... - Joe 11/19/99 (3)
  • Re: Mouse/trackball sensitive settings..... - LuSiD 11/21/99 (0)
  • Re: Mouse/trackball sensitive settings..... - Mr SaLTy 11/19/99 (0)
  • Also, has anyone tinkered with the "mouse threshold" setting? * NT - Joe 11/19/99 (0)

• About the Board - Rob Caskey(StaticX) 11/19/99 (4)
  • By nntp, you mean a full fledge news group? (more) - Tom61 11/19/99 (3)
    • No not really. - Rob Caskey (StaticX) 11/19/99 (2)
      • Re: No not really. - Tom61 11/19/99 (1)
        • No (more) - Rob Caskey (StaticX) 11/19/99 (0)

• SPARE PARTS VENDORS IN UK - CAVEMAN JOE 11/19/99 (2)
  • Re: SPARE PARTS VENDORS IN UK - Mike 11/19/99 (1)
    • Re: SPARE PARTS VENDORS IN UK - CAVEMAN JOE 11/20/99 (0)

• Need tips on joystick hack(in)..... - NIVO 11/19/99 (1)
  • Try reposting this, all that was in there was "Ju" ^nt^ - Tom61 11/19/99 (0)

• Sidewinder Hack - Tom7777 11/19/99 (5)
  • I might can help you! - Rob Caskey (StaticX) 11/19/99 (0)
  • Re: Sidewinder Hack - -Ace- 11/19/99 (0)
  • Are you related to Tom61? * NT - Joe 11/19/99 (2)
    • Re: Are you related to Tom61? * NT - Tom7777 11/19/99 (1)
      • I *remember* 1977. Despite the disco, it was still a good year. LOL. * NT - Joe 11/22/99 (0)

• MAME box control interfaces - Chris Ainsworth 11/19/99 (2)
  • Re: MAME box control interfaces - Andy Warne 11/19/99 (1)
    • Re: MAME box control interfaces/custom drivers - Chris 11/19/99 (0)

• PLEASE E-MAIL ME WITH JOYSTICK HELP! - John 11/18/99 (1)
  • You will find collapsable tactile domes at... - TwistyGrip 11/18/99 (0)

• PacMAME: Ask and you shall receive.... - Joe 11/18/99 (0)

• Need some advice on 2 possible ATI videocards. . . - -Ace- 11/18/99 (11)
  • Re: Need some advice on 2 possible ATI videocards. . . - Andy Geez 11/18/99 (10)
    • Re: Need some advice on 2 possible ATI videocards. . . - -Ace- 11/18/99 (9)
      • Anybody who hasn't got an ATI (mach64) vid card and uses Arcade Monitor try this modifed version of MAME. - Andy Geez 11/18/99 (8)
        • Re: Some feedback Andy. . . - -Ace- 11/18/99 (7)
          • Andy will this 16 bit driver - Nick 11/19/99 (2)
            • Re: Andy will this 16 bit driver - Andy Geez 11/19/99 (1)
              • Not yet :) I haven't got the pc going correctly!Joystick Problems*nt* - Nick 11/19/99 (0)
          • Re: Some feedback Andy. . . - Andy 11/19/99 (3)
            • Some more questions for -ACE- - Andy 11/19/99 (2)
              • Re: Some more questions for -ACE- - -Ace- 11/19/99 (1)
                • Re: Some more questions for -ACE- - Andy 11/19/99 (0)

• Hey Saint - Andy Desak 11/18/99 (2)
  • No.. Hm. Use saint@accessgenesis.net for now. Re: Hey Saint - saint 11/18/99 (1)
    • Scratch that. Use saint@null.net. Fixed. - saint 11/18/99 (0)

• T2 Gun - Nate Thompson 11/18/99 (3)
  • Re: T2 Gun - Andy Geez 11/18/99 (2)
    • Re: T2 Gun - Nate Thompson 11/18/99 (1)
      • Re: T2 Gun - Andy 11/18/99 (0)

• Argh.. I've been charged about 1 week ago.. I still don't receive my 2 four bucks trackballs... Life is sad, indeed.. (NT) :´(( - Gerald Gorman 11/18/99 (1)
  • Ummm.... How 'bout you wait to get sad another week, unless you live really close to them, it probably takes 2 weeks to have them shipped to you! ^nt^ - Tom61 11/18/99 (0)

• Please read , to be our testbed.. - Stick-It Joysticks 11/17/99 (1)
  • Re: Please read , to be our testbed.. - JP4 11/18/99 (0)

• Can Someone Scan this image? I'm looking everywhere.. - Dave 11/17/99 (0)

• 4 player cabinate delieverd today! - onion 11/17/99 (1)
  • Congrats!! On the new Cab!!! (nt) - Jim M 11/17/99 (0)

• Direct Pad Pro, PSX controller and Assault... - ElvisP 11/17/99 (0)

• I am buying a KE-72 as we speak, had them overnight it, should have it by Friday =)... - PacFan 11/17/99 (0)

• Items for Sale - Nate Thompson 11/17/99 (1)
  • I'd keep the trackball interface, like it might be useful later on!? *NT* - Andy Geez 11/17/99 (0)

• Does any one know where I can find a psx dual shock to usb interface? - Orochi 11/17/99 (4)
  • It's all on this site you just have to look REAL careful (link inside) - matt(v) 11/17/99 (3)
    • Thanks for your attention, but Im afraid it isnt of any help, the mega tap isnt usb and Simon Nield's set up doesnt have support for force feed back. - Orochi 11/18/99 (2)
      • pre-programed USB chips - matt(v) 11/18/99 (1)
        • Fine Faze was going to burn chips but decided against it. - Orochi 11/19/99 (0)

• Does anyone know where I can get a key mapper for usb game pads? - Orochi 11/17/99 (0)

• Happs Super8 Joysticks Help!!! - John 11/16/99 (2)
  • Took me a bit to figure that one out too... :) [NT] - JP4 11/17/99 (0)
  • Found answer on Happs website. Thanks keep posting great info found here. - john 11/16/99 (0)

• Mame with 2 sidewinders? possible? - LaserRot 11/16/99 (8)
  • Re: If you have not found a solution yet, I can help. . . . - -Ace- 11/17/99 (3)
    • Send it my way :) Re: If you have not found a solution yet, I can help. . . . - saint 11/17/99 (0)
    • Send it my way :) Re: If you have not found a solution yet, I can help. . . . - saint 11/17/99 (1)
      • Re: Will do (nt) - -Ace- 11/17/99 (0)
  • unload your Windows Sidewinder driver... - Wes 11/17/99 (0)
  • Cant you just create two profiles? - Orochi 11/17/99 (0)
  • Try the EmuAdvice link at MAMEWorld. KillerClown is a pro at this. * NT - Joe 11/17/99 (0)
  • DOS TSR's ?Re: Mame with 2 sidewinders? possible? - saint 11/16/99 (0)

• Two Trackball Interface Inquiry - S Jones 11/16/99 (4)
  • Hmm... what other games use dual trackballs? - Pengo 11/17/99 (2)
    • Re: Hmm... what other games use dual trackballs? - Ray Ghanbari 11/18/99 (1)
      • Re: Cabal used two trackballs I believe..(NT) - Chris 11/19/99 (0)
  • Re: Two Trackball Interface Inquiry - Andy Geez 11/16/99 (0)

• Digital joysticks with Crossbow?? anyone? - Jim Putman 11/16/99 (1)
  • Re: Digital joysticks with Crossbow?? anyone? - Andy Geez 11/16/99 (0)

• Act-Labs has the Power Ramps back in stock again. - Just Michael 11/16/99 (0)

• JoyMouse - Jerky 11/15/99 (0)

• Hagstrom Encoder - tonight :) - saint 11/15/99 (5)
  • Aargh, I want this too! Anybody in Europe/Holland wanna buy my LP-24 ?! - Pier 11/16/99 (0)
  • Re: Hagstrom Encoder - tonight :) - Andy Geez 11/16/99 (1)
    • My time machine broke when I installed DirectX 7.0. Bummer! * NT - Joe 11/16/99 (0)
  • KE-72 Looks Good! - Brian 11/16/99 (0)
  • Re: Hagstrom Encoder - tonight :) - Ray Iddings 11/16/99 (0)

• The ultimate encoder, would you buy it? - Tom61 11/15/99 (4)
  • Techno-Zombie test complete, this board is clean ^nt^ - Tom61 11/16/99 (0)
  • No, because I only play one game: Boot Hill. * NT - Joe 11/16/99 (0)
  • Re: The ultimate encoder, would you buy it? - Andy Geez 11/16/99 (0)
  • No, because I play only two games. Star Wars and Robotron. - Astroblitz 11/15/99 (0)

• New Opti-MAME, dual marble fun anyone?? - A.Geez 11/15/99 (4)
  • Re: New Opti-MAME, dual marble fun anyone?? - Pengo 11/15/99 (3)
    • Re: New Opti-MAME, dual marble fun anyone?? - Andy Geez 11/15/99 (2)
      • Thanks again Andy. This definetely is the best derivative work of mame. It simply rocks. (NT) - Gerald Gorman 11/15/99 (0)
      • Re: New Opti-MAME, dual marble fun anyone?? - Just Michael 11/15/99 (0)

• What if... (controller interface ideas, put on your creativity hats) - Cablouie 11/15/99 (1)
  • Re: Sounds basically like a USB type interface, very interesting - NIVO 11/15/99 (0)

• MegaRacer controller for PSX - AUX 11/15/99 (0)

• VGA output, voltages, and arcade monitors (Brian Lewis, Andy Geezer, et al) - Joe 11/15/99 (2)
  • Re: VGA output, voltages, and arcade monitors (Brian Lewis, Andy Geezer, et al) - Brian Lewis 11/15/99 (1)
    • Thanks, and.... - Joe 11/15/99 (0)

• Arcade Control interface - Andy Warne 11/15/99 (4)
  • Re: Arcade Control interface - Paul 11/17/99 (2)
    • Re: Arcade Control interface - Andy Warne 11/18/99 (1)
      • Re: Arcade Control interface - Switch 11/19/99 (0)
  • Re: Arcade Control interface - johnmac 11/15/99 (0)

• Bandwidth crunching - saint 11/14/99 (6)
  • Re: Bandwidth crunching - LuSiD 11/15/99 (0)
  • Another idea - Mark Thomas 11/14/99 (2)
    • Things I've done before - Mark Thomas 11/14/99 (0)
    • I like it! ^nt^ - Tom61 11/14/99 (0)
  • Ideas - Tom61 11/14/99 (1)
    • I like this idea. Self trimming too. - Just Michael 11/15/99 (0)

• New mame license, does it affect anybody but Tim (Arcade@Home)? - Tom61 11/14/99 (9)
  • Re: New mame license, does it affect anybody but Tim (Arcade@Home)? - Rockin 11/15/99 (0)
  • Re: New mame license, does it affect anybody but Tim (Arcade@Home)? - johnmac 11/14/99 (0)
  • Re: New mame license, does it affect anybody but Tim (Arcade@Home)? - Mr SaLTy 11/14/99 (3)
    • It actually said that? - Tom61 11/14/99 (2)
      • Revised and corrected version: I thought Mame team's reasoning was something like that - Tom61 11/14/99 (1)
        • Official vs derivative MAME versions Re: Revised and corrected version: I thought Mame team's reasoning was something like that - saint 11/14/99 (0)
  • It kills Amame and Pmame. They are just slight modifications. - Just Michael 11/14/99 (2)
    • Hmmm... I don't know... Looking closer... - Tom61 11/14/99 (1)
      • Re: Hmmm... I don't know... Looking closer... - Just Michael 11/15/99 (0)

• Videocard in PC2Jamma. Which one to choose ?! - Pier 11/14/99 (1)
  • Re: Videocard in PC2Jamma. Which one to choose ?! - Mr SaLTy 11/14/99 (0)

• Controller builders -- GO USB! No keyboard interface! - Jeff Atwood 11/14/99 (20)
  • Re: Happ Controls UGCI - Chris Ainsworth 11/19/99 (0)
  • Re: Controller builders -- GO USB! No keyboard interface! - Andy Warne 11/15/99 (0)
  • Re: Controller builders -- We offer USB but no one buys it!!! - Stick-It Joysticks 11/15/99 (0)
  • Re: Controller builders -- GO USB! No keyboard interface! - Stick-It Joysticks 11/15/99 (0)
  • Re: Controller builders -- GO USB! No keyboard interface! - Jeff Atwood 11/14/99 (8)
    • Re: Controller builders -- GO USB! No keyboard interface! - Bart 11/14/99 (6)
      • Re: Controller builders -- GO USB! No keyboard interface! - Jeff Atwood 11/14/99 (5)
        • Re: Controller builders -- GO USB! No keyboard interface! - Tom61 11/14/99 (4)
          • Re: Controller builders -- GO USB! No keyboard interface! - Jeff Atwood 11/14/99 (3)
            • Re: Controller builders -- GO USB! No keyboard interface! - Tom61 11/14/99 (2)
              • A little sanity here... (was Re: Controller builders -- GO USB! No keyboard interface!) - Bart 11/15/99 (1)
                • Re: A little sanity here... (was Re: Controller builders -- GO USB! No keyboard interface!) - LuSiD 11/15/99 (0)
    • Re: Controller builders -- GO USB! No keyboard interface! - Jerky 11/14/99 (0)
  • USB no go for most.. - Andy Geez 11/14/99 (0)
  • Re: Usb Question/Comment - Ray Idddings 11/14/99 (0)
  • Re: Usb Question/Comment - Ray Idddings 11/14/99 (1)
    • Re: Usb Question/Comment one more thing - Ray Iddings 11/14/99 (0)
  • Question on USB - Jim M 11/14/99 (2)
    • Re: Question on USB - xiaou2 11/14/99 (1)
      • USB Bandwith is actually quite high - Wes 11/14/99 (0)

• * * * * Monitor Nightmare - HELP! * * * * - Joe 11/14/99 (4)
  • Thanks for the feedback... here's some answers for the curious. - Joe 11/15/99 (0)
  • Re: * * * * Monitor Nightmare - HELP! * * * * - Tom61 11/14/99 (0)
  • Re: * * * * Monitor Nightmare - HELP! * * * * - -Ace- 11/14/99 (0)
  • Re: * * * * Monitor Nightmare - HELP! * * * * - Andy Geez. 11/14/99 (0)

• test - Another test 11/13/99 (3)
  • Umm... there' no gap between threads 3 and down! - Tom61 11/13/99 (1)
    • Yeah - it's a feature, honest :) Re: Umm... there' no gap between threads 3 and down! - saint 11/13/99 (0)
  • Re: test - asdfa 11/13/99 (0)

• Slight update on my project. - Tom61 11/13/99 (0)

• You no longer have to wait for page to load before you can hit the post button ... I think :) - test #2 11/13/99 (3)
  • Cool... thanks, it takes a while to load all the messages on a 56K! (During peak times, anyway) - Tom61 11/13/99 (0)
  • Re: You no longer have to wait for page to load before you can hit the post button ... I think :) - test2 11/13/99 (1)
    • IP addresses should now be logged in a hidden file Re: You no longer have to wait for page to load before you can hit the post button ... I think :) - test3 11/13/99 (0)

• Oops - lost a few messages - saint 11/13/99 (1)
  • And I'm not here to try to stump anyone*nt* - Lol 11/13/99 (0)

• Can anyone comment on the VGA - 27" W.G U3000 monitor? - Joseph Fox 11/12/99 (5)
  • It will look good, but not the same as an arcade monitor... - Joe 11/13/99 (0)
  • Re: Read the specs carefully....see inside - LuSiD 11/12/99 (3)
    • Re: Read the specs carefully....see inside - Joseph Fox 11/13/99 (0)
    • kind of related! Quake2 in cabinet control setup - exph 11/13/99 (1)
      • Weird! My post isn't listed on the main message page! Saint ate my message!! (duplicate inclosed) - Tom61 11/13/99 (0)

• Looking for any lightgun information.. - Andy Geez 11/12/99 (11)
  • Dejavu! - Tom61 11/12/99 (10)
    • Trying something in HTML (same content as above ^nt^ - Tom61 11/12/99 (9)
      • Some theory on Optical guns which I have presumed.. - Andy Geez 11/12/99 (8)
        • Re: Some theory on Optical guns which I have presumed.. - Tom61 11/12/99 (0)
        • Re: Some theory on Optical guns which I have presumed.. - Jerky 11/12/99 (6)
          • Re: Some theory on Optical guns which I have presumed.. - Jerky 11/12/99 (5)
            • 50k, sorry saint - Jerky 11/12/99 (4)
              • the rest could be found here - Jerky 11/12/99 (3)
                • One more...I'm done...good-night - Jerky 11/12/99 (2)
                  • Re: One more...I'm done...good-night - Tom61 11/12/99 (1)
                    • history of the parallel port - Jerky 11/13/99 (0)

• Tom61.. u using powerramp mite? if so.... hows it going? - NIVO 11/12/99 (2)
  • No, I'm using/going to use a regular PR not the Mite. ^nt^ - Tom61 11/12/99 (1)
    • Re:Ok Tom, just wondering about wiring that badboy up!! - NIVO 11/12/99 (0)

• Just got my rotary joysticks! - Macros 11/12/99 (1)
  • Re: Just got my rotary joysticks! - Torgo 11/12/99 (0)

• GAMMA is your friend... - Joe 11/12/99 (2)
  • Re: GAMMA is your friend... - Rockin 11/14/99 (0)
  • Awsome! - Dan 11/13/99 (0)

• Let the hacking begin. - Jerky 11/11/99 (7)
  • Re: Let the hacking begin. - Torgo 11/12/99 (1)
    • Re: Let the hacking begin. - Jerky 11/12/99 (0)
  • Don't say you didn't ask for it! - Tom61 11/11/99 (4)
    • Great! I managed to mess up the html! One quote can ruin your whole day! - Tom61 11/11/99 (3)
      • AAAARRRRRGGGGGGGG!!!!!!!!!! (url to flight inside, I *think*) - Tom61 11/11/99 (2)
        • BTW Flight was last edited Mar 25,1999! ^nt^ - Tom61 11/11/99 (1)
          • Re: BTW Flight was last edited Mar 25,1999! ^nt^ - Jerky 11/11/99 (0)

• Inable spinner in Galaga? (and some Opti-Mame questions) - Tom61 11/11/99 (2)
  • Re: Inable spinner in Galaga? (and some Opti-Mame questions) - powerjaw 11/11/99 (1)
    • Darn it! Didn't think of that!^nt^ - Tom61 11/11/99 (0)

• What about a four player cabinate? - onion 11/11/99 (3)
  • Re: What about a four player cabinate? - Matt M. 11/12/99 (0)
  • four player - ray iddings 11/12/99 (0)
  • Re: What about a four player cabinate? - Tom61 11/11/99 (0)

• Welcome Back Saint - Ray Iddings 11/11/99 (0)

• Anyone have pics on using Gravis Gamepad pro as joy hack(more) - NIVO 11/11/99 (0)

• The ATI cards & ArcOS & Mame - Acur8 11/11/99 (1)
  • Re: The ATI cards & ArcOS & Mame - Andy Geez 11/11/99 (0)

• Next version of Opti-MAME will support... - Andy Geez 11/10/99 (11)
  • Re: Next version of Opti-MAME will support... - Just Michael 11/10/99 (0)
  • Re: Next version of Opti-MAME will support... - Jerky 11/10/99 (0)
  • F**king awsome, but... - Torgo 11/10/99 (8)
    • 2 serial ports? - AUX 11/11/99 (1)
      • Re: 2 serial ports? - Andy Geez 11/11/99 (0)
    • Re: F**king awsome, but... - Andy Geez 11/11/99 (0)
    • Re: F**king awsome, but... - xiaou2 11/10/99 (4)
      • Re: F**king awsome, but... - Ray Iddings 11/10/99 (3)
        • Other 2-trackball games - Wes 11/11/99 (2)
          • Re: Other 2-trackball games - Shawn Atari 11/11/99 (0)
          • Atari basketball*nt* - Jerky 11/11/99 (0)

• Counter Top Cabinet - Cutter 11/10/99 (3)
  • Re: Counter Top Cabinet - Jim K 11/11/99 (1)
    • Re: Counter Top Cabinet - Cutter 11/21/99 (0)
  • Re: Counter Top Cabinet - Jerky 11/10/99 (0)

• Tech tip: power rotating monitor - Jerky 11/10/99 (3)
  • Re: Tech tip: power rotating monitor - Shawn Atari 11/11/99 (1)
    • Re: Tech tip: power rotating monitor - Jerky 11/11/99 (0)
  • off the beating trail.. - Jerky 11/10/99 (0)

• Can't find P1 and P2 buttons on Happ's site! - Tom61 11/10/99 (5)
  • Thanks, I found them ^nt^ - Tom61 11/11/99 (0)
  • They're on the site- right here: http://www.happcontrols.com/amusement/pushbutts/589111l1ply.htm (nt) - jh 11/11/99 (0)
  • Re: Can't find P1 and P2 buttons on Happ's site! - Nate Thompson 11/10/99 (1)
    • Re: Can't find P1 and P2 buttons on Happ's site! - Tom61 11/10/99 (0)
  • I have a catalog at the house..I'll post part# later...I asume you want the horizontal..{nt} - =-JacK-= 11/10/99 (0)

• Need opinions for CP interface (regulars please read) - Nefarious 11/10/99 (8)
  • Thanks for all the input! (more) - Nefarious 11/11/99 (0)
  • Bob Roberts sells the fingerboards (link inside) - Joe 11/11/99 (0)
  • Re: The way I did mine... - Matt M. 11/11/99 (3)
    • Your CP sounds nice - you'll have to post pics! * NT - Joe 11/11/99 (2)
      • Re: I haven't developed the film yet... - Matt M. 11/11/99 (1)
        • Re: I haven't developed the film yet... - Joe 11/11/99 (0)
  • Re: Need opinions for CP interface (regulars please read) - Tom61 11/10/99 (1)
    • Re: Need opinions for CP interface (regulars please read) - Jerky 11/10/99 (0)

• Light gun??? - Wes 11/10/99 (7)
  • Re: Light gun??? & Justifier-GunCon adapters? - AUX 11/12/99 (1)
    • Re: Light gun??? & Justifier-GunCon adapters? - Tom61 11/12/99 (0)
  • Re: Light gun??? - Erik Adair 11/12/99 (2)
    • One Game Stands Out: Terminator 2 (n/t) - Nate Thompson 11/12/99 (1)
      • Actually,: Terminator 2 used pots for positioning.(nt) - xiaou2 11/12/99 (0)
  • Re: Light gun??? - Andy Geez 11/10/99 (1)
    • Re: Light gun??? - Tom61 11/10/99 (0)

• New project of mine -- Suggestions gladly welcomed. - Michael Bobroski 11/10/99 (13)
  • Check out NLX form factor components, see inside. - LuSiD 11/12/99 (0)
  • Re: New project of mine -- Suggestions gladly welcomed. - Erik Adair 11/11/99 (1)
    • Re: New project of mine -- Suggestions gladly welcomed. - Michael Bobroski 11/12/99 (0)
  • Re: New project of mine -- Suggestions gladly welcomed. - ChrisW 11/11/99 (1)
    • Re: New project of mine -- Suggestions gladly welcomed. - Michael Bobroski 11/12/99 (0)
  • Re: Great idea!!! - Matt M. 11/11/99 (1)
    • Re: Great idea!!! - Michael Bobroski 11/11/99 (0)
  • Re: New project of mine -- Suggestions gladly welcomed. - Mark Ormond 11/11/99 (0)
  • How about using a laptop? (more) - Bart 11/10/99 (4)
    • Re: How about using a laptop? (more) - aux 11/11/99 (3)
      • Re: How about using a laptop? (more) - Jerky 11/11/99 (1)
        • Aux, I meant OUTPUT *nt* - Jerky 11/11/99 (0)
      • Re: How about using a laptop? (more) - Michael Bobroski 11/11/99 (0)

• Question for the group: Next Projects? - Joe 11/10/99 (3)
  • Re: Question for the group: Next Projects? - PacFan 11/10/99 (0)
  • Re: Question for the group: Next Projects? - Jerky 11/10/99 (0)
  • Re: Question for the group: Next Projects? - Michael Bobroski 11/10/99 (0)

• FOUND: 68-Pin header ribbon cables! - Joe 11/10/99 (1)
  • Re:Sorry I won't work - ray Iddings 11/10/99 (0)

• Retrocade Remapping...who uses it? - johnmac 11/09/99 (0)

• Happ Controls PC Interface Help!!! - mike 11/09/99 (2)
  • Re: Happ Controls PC Interface Help CONTINUED... - mike 11/15/99 (0)
  • Re: Happ Controls PC Interface Help!!! - Tom61 11/10/99 (0)

• Anyone using powerramp mite as joystick hack?..(more) - NIVO 11/09/99 (1)
  • Re: Anyone using powerramp mite as joystick hack?..(more) - Tom61 11/10/99 (0)

• Goddam it! .. now I'm buying a 2nd one! - Acur8 11/09/99 (2)
  • Re: Goddam it! .. now I'm buying a 2nd one! - PacFan 11/10/99 (0)
  • *groan*...this board's really going to pot (NT) - Astroblitz 11/09/99 (0)

• New Rocketcade Pictures On-Line - Nate Thompson 11/09/99 (10)
  • Looks great but isn't pic 15 upside down? - Just Michael 11/10/99 (0)
  • You should be proud! (Is that really blue T-Molding?) * NT - Joe 11/10/99 (1)
    • Yep! Authentic Blue T-Moulding! =) (n/t) - Nate Thompson 11/10/99 (0)
  • Rocketcade is Awesome - ray iddings 11/09/99 (1)
    • Thanks for Your Support and Nice Words! - Nate Thompson 11/09/99 (0)
  • Re: New Rocketcade Pictures On-Line - Jerky 11/09/99 (4)
    • Re: New Rocketcade Pictures On-Line - jerky 11/09/99 (3)
      • WG U3100 & Control Interface - Nate Thompson 11/09/99 (2)
        • Funny... The grass is always greener.... - Joe 11/10/99 (1)
          • I'll Trade Ya! (j/k) =) (n/t) - Nate Thompson 11/10/99 (0)

• Planar vs. Linear video modes... - Joe 11/09/99 (0)

• Questions on ordering arcade parts..........(need some info) - NIVO 11/09/99 (4)
  • I just got my Happ order (Supers + buttons)--took 2 days. [nt] - Pengo 11/09/99 (0)
  • I live in England and Happs are amazingly swift! *NT* - Andy Geez 11/09/99 (1)
    • Re: Note to self... - Ray Iddings 11/09/99 (0)
  • Re: Questions on ordering arcade parts..........(need some info) - Andy Desak 11/09/99 (0)

• Anyone built/converted a Cocktail Cabinet? Info needed. - ChrisW 11/08/99 (3)
  • Re: Anyone built/converted a Cocktail Cabinet? Info needed. - Ray 11/09/99 (2)
    • Thanks for the reply Ray, but I can't e-mail you for more info because you supply an e-mail address!! {nt} - ChrisW 11/10/99 (1)
      • Re: Thanks for the reply Ray, but I can't e-mail you for more info because you supply an e-mail address!! {nt} - Ray Iddings 11/10/99 (0)

• The Encoders are available - Ray Iddings 11/08/99 (6)
  • Encoder Questions (Again) - Nate Thompson 11/08/99 (3)
    • Re: Encoder Questions (Again) - Ray Iddings 11/09/99 (2)
      • Yet Another Question - Nate Thompson 11/09/99 (1)
        • Re: Yet Another Answer:) - Ray Iddings 11/09/99 (0)
  • Couldnt find it on their site. - johnmac 11/08/99 (1)
    • Re: Couldnt find it.... - ray Iddings 11/08/99 (0)

• Torgo and Tom61: Do either of you have web sites? - Joe 11/08/99 (4)
  • Not yet (more) - Torgo 11/08/99 (2)
    • He'd tell ya, but then he'd have to kill ya! (-: (nt) - Jim M 11/09/99 (0)
    • Who the hell are you working for? The CIA?!? :) - Joe 11/09/99 (0)
  • Yes I have - Tom61 11/08/99 (0)

• Even More Spinner Questions. - Shawn Atari 11/08/99 (1)
  • Re: Even More Spinner Questions. - Andy Desak 11/08/99 (0)

• Atari Trackball - David 11/08/99 (5)
  • Re: Atari Trackball - aus 11/09/99 (0)
  • Re: Atari Trackball - Shawn Atari 11/09/99 (1)
    • Re: Atari Trackball - David 11/10/99 (0)
  • Re: Atari Trackball - mckechnossomy 11/08/99 (0)
  • Re: Atari Trackball - =-JacK-= 11/08/99 (0)

• Pacman monitor just quit - ??'s on repleacement - LaserRot 11/07/99 (3)
  • Re: Pacman monitor just quit - ??'s on repleacement - Jerky 11/07/99 (2)
    • Re: Pacman monitor just quit - ??'s on repleacement - jerky 11/07/99 (1)
      • Re: Pacman monitor just quit - ??'s on repleacement - Jerky 11/07/99 (0)

• Ideas for crazy add-ons - Jerky 11/07/99 (21)
  • Thanks - Jerky 11/08/99 (2)
    • oh, and.... - Jerky 11/08/99 (1)
      • Re: oh, and.... - Gerald Gorman 11/09/99 (0)
  • Interchangeable/dual screen cabinet w/vector monitor. - Joe 11/08/99 (0)
  • Re: Ideas for crazy add-ons - Nightowl007 11/08/99 (0)
  • Re: Ideas for crazy add-ons - Tom61 11/08/99 (1)
    • Re: Ideas for crazy add-ons - AUX 11/09/99 (0)
  • Re: Ideas for crazy add-ons - Cablouie 11/08/99 (0)
  • Re: Ideas for crazy add-ons - AUX 11/08/99 (0)
  • Re: Ideas for crazy add-ons - Ray Iddings 11/08/99 (0)
  • how about a powered rotating monitor - immorta 11/08/99 (5)
    • Re: how about a powered rotating monitor - Jerky 11/10/99 (0)
    • No need to make complicated stuff... - Gerald Gorman 11/09/99 (1)
      • Yeah, but how much of this stuff is based on need? [NT] - 11/10/99 (0)
    • Re: how about a powered rotating monitor - Shawn Atari 11/08/99 (1)
      • ...that rotates automatically when the orientation is detected! * NT - Joe 11/08/99 (0)
  • Re: Ideas for crazy add-ons - NIVO 11/08/99 (3)
    • LCDs! LCDs galore!!!! - Pengo 11/08/99 (2)
      • Re: Hey!! Get outta my head!(hehe) I think same as you!!!(nt) - NIVO 11/08/99 (0)
      • Re: Hey!! Get outta my head!(hehe) I think same as you!!!(nt) - NIVO 11/08/99 (0)
  • Re: Ideas for crazy add-ons - mckechnossomy 11/08/99 (0)

• Some Contests - Ray Iddings 11/07/99 (0)

• Another Arcade Parts Site - Jerky 11/07/99 (0)

• Check this out (I'm proud of myself) - Torgo 11/06/99 (2)
  • Re: Check this out (I'm proud of myself) - Jerky 11/07/99 (0)
  • How many are you going to make? See the post below ^nt^ - Tom61 11/06/99 (0)

• How many CP's? - Tom61 11/06/99 (2)
  • Re: How many CP's? - Tom61 11/06/99 (1)
    • Sensing control panels - G-Rad 11/08/99 (0)

• Mouse PS/2 Port :Update, I need more help - johnmac 11/06/99 (2)
  • Re: Mouse PS/2 Port :Update, I need more help - Jerky 11/06/99 (1)
    • I used a $49 WhyMouse adapter on my serial port... - Joe 11/08/99 (0)

• Any Word on Sales of the 72-key Encoder? (n/t) - Nate Thompson 11/06/99 (5)
  • Re: Any Word on Sales of the 72-key Encoder? (n/t) - Ray 11/06/99 (4)
    • Any word on price or is that a secret? =) n/t - Nate Thompson 11/07/99 (3)
      • Re: Ahh is that important?? - Ray Iddings 11/07/99 (2)
        • Extra Bonus! =) - Nate Thompson 11/07/99 (1)
          • So when can we expect the first posts about hacking the 72 input encoder!?!? * NT - Joe 11/08/99 (0)

• Any interest in.... - Andy Desak 11/06/99 (4)
  • Re: Any interest in.... - Rockin' 11/07/99 (0)
  • Yes, please share! - Torgo 11/06/99 (0)
  • Interested in the spinner... and thank you.... - Joe 11/06/99 (0)

• Saint - Jerky 11/06/99 (1)
  • You are NOT clutter! Keep contributing! * NT - Joe 11/06/99 (0)

• Monitor stopped working - Mike 11/06/99 (1)
  • Try rgvac. They are GREAT with this kind potentially dangerous of stuff. * NT - Joe 11/06/99 (0)

• The ZipStik are now for sale(well sort of) - Paul from ZipStik 11/06/99 (1)
  • This is not the place for solicitations - StaticX 11/06/99 (0)

• Too cool.... - Jerky 11/05/99 (15)
  • Re: Too cool.... - Andy Desak 11/06/99 (3)
    • Re: Too cool.... - Jerky 11/06/99 (0)
    • Re: Now its Official... - Ray Iddings 11/06/99 (1)
      • Re: Now its Official... - Andy Desak 11/06/99 (0)
  • Re: Too cool.... - Tom61 11/05/99 (10)
    • Re: Too cool.... - Jerky 11/05/99 (6)
      • Re: Too cool.... - Tom61 11/05/99 (5)
        • Re: Too cool.... - Jerky 11/05/99 (4)
          • Re: Too cool.... - Jerky 11/05/99 (3)
            • Re: Too cool.... - Jerky 11/05/99 (2)
              • Quick! Snap out of it Jerky. You're talking to yourself again. :) * NT - Joe 11/06/99 (1)
                • Re: Quick! Snap out of it Jerky. You're talking to yourself again. :) * NT - Jerky 11/06/99 (0)
    • Now How Do We Integrate That Into a MAME Cabinet? (nt) - Nate Thompson 11/05/99 (2)
      • et? (nt) - Jerky 11/05/99 (1)
        • I meant.(re) Now How Do We Integrate That Into a - Jerky 11/05/99 (0)

• Opti-MAME slight update for screen centering. - Andy Geez 11/05/99 (3)
  • Cool... thanks (more) - Tom61 11/05/99 (2)
    • I meant (nt) - Tom61 11/05/99 (1)
      • Almost gotcha! - =-JacK-= 11/05/99 (0)
• I need a manual for the game "Cal .50"(caliber 50)-please help - NIVO 11/05/99 (0)
• Another idea for a spinner... - Wes 11/05/99 (3)
  • Re: Another idea for a spinner... - Shawn Atari 11/05/99 (0)
  • Re: Another idea for a spinner... - Andy Geez 11/05/99 (1)
    • Re: Another idea for a spinner... - Torgo 11/05/99 (0)
• locking down the control panel - john mac 11/04/99 (2)
  • Re: locking down the control panel - Mr SaLTy 11/05/99 (0)
  • Use this instead... - Gerald Gorman 11/04/99 (0)
• I have an idea for marquee(just had brainstorm)...... - NIVO 11/04/99 (1)
  • here are some tips (from where I got my marquee picture) - Gerald Gorman 11/04/99 (0)
• Hagstrom KE18 ??? - Cablouie 11/04/99 (0)
• What material are control panel overlays made of?? {more} - ChrisW 11/04/99 (4)
  • where abouts in Aus? Im there too :) {nt} - immorta 11/05/99 (1)
    • Re: where abouts in Aus? Im there too :) {nt} - ChrisW 11/07/99 (0)
  • Sorry people - I forgot to tell you I'm from Australia, so any suppliers would need to be local to me!! {nt} - ChrisW 11/04/99 (1)
    • Re: Sorry people - I forgot to tell you I'm from Australia, so any suppliers would need to be local to me!! {nt} - =-JacK-= 11/04/99 (0)
• MCM carries Happ parts, and sometimes cheaper than Happ! - Tom61 11/04/99 (3)
  • Make sure you check the deals on their web site - Tom61 11/04/99 (2)
    • GREAT site Tom...I just ordered $80 worth of stuff I didn't know I needed {nt} - =-JacK-= 11/05/99 (1)
      • Then DON'T get their full catalog, you'll end up ordering $800 worth of stuff! ;) ^nt^ - Tom61 11/05/99 (0)
• ADB Mac arcade controller completed... - Voch 11/04/99 (4)
  • Re: ADB Mac arcade controller completed... - mckechnossomy 11/04/99 (0)
  • Re: ADB Mac arcade controller completed... - powerjaw 11/04/99 (2)
    • Re: ADB Mac arcade controller completed... - Voch 11/05/99 (1)
      • ADB Mac arcade controller keys... - Voch 11/05/99 (0)
• My controls arrived! (a note on Happ super-8's...) - Matt M. 11/04/99 (3)
  • Re: My controls arrived! (a note on Happ super-8's...) - mckechnossomy 11/04/99 (2)
    • Re: My controls arrived! (a note on Happ super-8's...) - Richard Ragon 11/05/99 (1)
      • 5000 on backorder, 800 in stock according to Happs. * NT - Joe 11/05/99 (0)
• Mounting hardware for Happ Super-8??? - Cablouie 11/04/99 (3)
  • Re: Mounting hardware for Happ Super-8??? - mckechnossomy 11/05/99 (1)
    • Buy them cheaper at a hardware store (and no $25 minimum) * NT - Dan 11/05/99 (0)
  • "Mounting Hardware" is a just fancy term for nuts and bolts. - Joe 11/04/99 (0)
• OptiMAME...You Rule! - Nate Thompson 11/04/99 (0)
• Any control part sellers in Ohio????(please read inside..) - NIVO 11/04/99 (2)
  • Here's someone who can help... - Joe 11/04/99 (1)
    • Re: Thanks alot joe, i appreciate it.(nt) - NIVO 11/04/99 (0)
• Need help w/ selecting a GOOD soundcard. . anyone. . . - -Ace- 11/03/99 (2)
  • Re: Need help w/ selecting a GOOD soundcard. . anyone. . . - Nate Thompson 11/04/99 (0)
  • Re: Need help w/ selecting a GOOD soundcard. . anyone. . . - Mr SaLTy 11/04/99 (0)
• drill bit size for button - john mac 11/03/99 (4)
  • Re: drill bit size for button - Shawn P. Maloy 11/03/99 (0)
  • Re: drill bit size for button - TwistyGrip 11/03/99 (1)
    • Re: drill bit size for button - Andy Desak 11/04/99 (0)
  • 1 1/8" if you are using standard Happ buttons (nt) - Torgo 11/03/99 (0)
• No luck with neither Happ not Wico - Staffan Vilcans 11/03/99 (8)
  • I spent over $300 with them and could never get them to send me a catalogue! * NT - Joe 11/03/99 (1)
    • Re: FORGET WICO! Might as well burn your money - ditto 11/04/99 (0)
  • Re: No luck with neither Happ not Wico - JP4 11/03/99 (1)